APC AP9606 Event Actions (Web Interface only)

Web/SNMP Management SmartSlot Card User’s Guide 53
Events Menu
Event Actions (Web Interface only)
Overview The Actions option is available only in the Web interface’s Events
menu. It allows you to select whether the following actions are enabled
or disabled for events with a specified severity level:
• Events Log
•SNMP Traps
•Email
Note: You can use an evntlist.htm page to change t he severi ty
level assigned to a specific event. For more information,
see How to Configure Individual Events on page 59.
For information about the event log, see Event Log on page 51; for
information about the UPS, Environmental Monitoring SmartSlot Card,
and Management Card events, including the default severity level for
each event, see Management Card and Device Events on page 61;
for information about Email notifications, see Email on page 56.
Severity levels With the exception of some system (Management Card) events that do
not have a severity level assigned, each event is assigned a default
severity level based on the type of action that is required when the event
occurs.
• Informational: Indicates an event that requires no action, such
as a notification of a return from an abnormal condition.
• Warning: Indicates an event that may need to be addressed if
the condition continues, but which does not require immediate
attention.
• Severe: Indicates an event that requires immediate attention.
Unless resolved, UPS and Management Card severe events
can cause incorrect operation of the UPS or its supported
equipment, or can result in the loss of UPS protection during a
power failure. Environmental Monitoring SmartSlot Card severe
events warn of abnormal environmental conditions or possible
security violations.
Note: To use an evntlist.htm page to change the severity level
assigned to a specific event, see How to Configure
Individual Events on page 59.
Continued on next page