Web/SNMP Management SmartSlot Card User’s Guide 49
Device Manager Menus
Environment Menu Options
Overview The Status option (Web interface) and the Threshold and Contact
Details option (Control Console) provide access to the status
information about the probes and contacts. The Status option in the
Web interface also accesses the firmware information for the
Environmental Monitoring SmartSlot Card. In the Control Console, the
firmware information is accessed through the About Environmental
Monitor option.
The Configuration option in the Web interface provides access to all of
the configuration settings for the probes and contacts. In the Control
Console, individual options (Trap Thresho lds Prob e 1, Trap Thresholds
Probe 2, and Contact Settings) are used.
Probe status These fields report on the status for each probe.
Note: For information about the threshold values cited in the table,
see Probe settings below.
Contact status Reports the name of each contact alarm, and whether the contact’s
alarm condition exists: Yes, No, or Disabled. For information about the
contact alarm settings, see Contact settings below.
Probe settings Use the Setting fields to define the temperature or humidity values for
the thresholds, and the Trap fields to Enable or Disable each threshold.
Contact settings Use the Name fields to define the name for the contact alarms, and the
Trap fields to Enable or Disable each alarm.
Status Field Definition
Temp erat ure The temperature sensed by the probe.
High or Low
Temperature
Violation
Whether the current temperature violates the probe’s
temperature threshold settings: Yes, No, or Disabled.
Humidity The relative humidity sensed by the probe.
High or Low
Humidity
Violation
Whether the current humidity violates the probe’s humidity
threshold settings: Yes, No, or Disabled.