Web/SNMP Management SmartSlot Card User’s Guide 57
Events Menu
Email continued
Email recipients The Recipients option in the Web interface’s Events menu, or the Email
option in the Control Console’s Network Menu, accesses the settings
you use to identify up to four Email recipients.
Note: In the Web interface, once you configure the settings for an
Email recipient, you can use an Email Test option to send an
Email message to that recipient. The Email Test option is
located directly below the Email Recipients settings.
Continued on next page
Setting Description
To Add ress Defines the user and domain names of the recipient. To use
Email for paging, use the Email address for that recipient’s
pager gateway account (for example, myacct100@skytel.com).
The pager gateway will generate the page.
Note: Email can only send text messages. Therefore, the
recipient’s pager must be able to use text-based
messaging.
Send via Selects whether Email will be routed through the Management
Card’s SMTP server (Local SMTP Server option) or sent
directly to the recipient’s SMTP server (Recipient’s SMTP
Server option). When the recipient uses the Management
Card’s SMTP server, this setting has no effect.
Note: The recommended selection is the Local SMTP Server
option. See Optimal Email Configuration Issues on
page 58.
Email Generation Enables (by default) or disables the sending of Email to the
defined recipient.