Web/SNMP Management SmartSlot Card User’s Guide 32
System Menu
Option Settings continued
Date & Time Use this option to change the Date (MM/DD/YYYY format) or Time
(HH:MM:SS format) used by the Management Card.
File Transfer The Web interface identifies the IP addresses for the remote TFTP and
FTP servers, as well as the case-sensitive User Name and Password
settings used for FTP (apc, is the default for both). To use TFTP and FTP
for file transfers, do the following:
1. Define the file name in the Filename field, and click Apply.
2. Select TFTP or FTP from the Initiate File Transfer Via menu,
and click Apply.
The Control Console allows you to use TFTP, FTP, and XMODEM.
1. Use the Settings option to define the file name.
2. Select TFTP, FTP, or XMODEM from the menu and follow the on-
screen instructions.
For information about how to define the TFTP and FTP settings, see
Network Menu on page 26; for more information about file transfers,
see the Management Card Addendum provided on the APC Web/
SNMP Management Card utility CD (.\doc\Addendum.pdf).
Tool s Use this option’s drop-down menu to reboot the Management Card or to
reset some or all of its configuration settings to their original, default
values.
Continued on next page
Menu Option Definition
Reboot Card Restarts the Management Card.
Reset Card to Defaults Resets all configuration settings including the TCP/IP
settings, and enables BOOTP.
Note: The Management Card will not be able to
operate on the network until its TCP/IP settings
are redefined.
Reset Card to Defaults
Except TCP/IP Resets all configuration setting s except t he TCP/I P and
BOOTP settings.