Web/SNMP Management SmartSlot Card User’s Guide 18
Control Console
Main Screen continued
Status and
identification
information,
continued
• Two fields identify when you logged in, by Date and Time.
Date :05/10/2000
Time :10:39:16
Note: For information about how to change the Date and Time
values, see System Menu on page 30.
•A
User field identifies whether you logged in as an Administra-
tor or Device Manager.
User :Administrator
•An
Up Time field reports how long the Management Card has
been running since it was last turned on or reset.
Up Time :0 days 17 hours 46 Minutes
•A
Status field reports the Management Card status.
Status : P+ N+ A+
The possible status symbols and there meanings are identified
and described in the following table:
Note: If you can access the Control Console, the AOS and net-
work will report that the status is operating properly (P+
and N+).
•A
UPS model and name field reports the status of the UPS.
Smart-UPS 700 named User Ed: On
Note: For more information about the UPS status, see UPS
Status Options on page 35.
•An
Environment field reports the status of the Environmental
Monitoring SmartSlot Card.
Environment: Thresholds Ok, Contact Alarms Ok
Note: For more information about the Environmental Monitor-
ing SmartSlot Card status, see Environment Menu
Options on page 49.
P+ Indicates that the APC operating system (AOS) is functioning
properly.
N+ Indicates that the network is functioning properly.
A+ Indicates that the network is functioning properly.
A- Indicates that the application has a bad checksum
A? Indicates that the application is initializing.
A! Indicates that the application is not compatible with the AOS.