APC AP9606 manual Event Recipients, As described in Event Actions Web Interface only on

Events Menu

Event Recipients

Overview	The Web interface and Control Console both have options that allow
	you to define the trap receivers and up to four Email addresses to be
	used when an event occurs that has the SNMP traps or Email enabled,
	as described in Event Actions (Web Interface only) on page 53.
Trap receivers	The Trap Receiver settings allow you to define up to four specific NMSs
	to which traps will be sent.
	Note: In the Control Console, access these settings through the
		SNMP option in the Network menu.
		Item	Definition
		Community Name	The password (maximum of 15
			characters) used when traps are sent to
			the NMS identified by the Receiver NMS IP
			setting.
		Receiver NMS IP	The IP address of the NMS to which traps
			will be sent. If this setting is 0.0.0.0 (the
			default value), traps will not be sent to any
			NMS.
		Trap Generation	Enables (by default) or disables the
			sending of any traps to the NMS identified
			the Receiver NMS IP setting.
		Authentication Traps	Enables or disables the sending of
			authentication traps to the NMS identified
			the Receiver NMS IP setting.
Email options	See Email on the next page.

Web/SNMP Management SmartSlot Card User’s Guide 55