Web/SNMP Management SmartSlot Card User’s Guide 56
Events Menu
Email
Overview You can use the Simple Mail Transfer Prot ocol (SMTP) to send Email to
up to four recipients when an event occurs.
To use the Email feature, you must define the following settings:
• The IP address of the Domain Name Service (DNS) server
• The DNS name of the SMTP server and the From Address set-
tings for SMTP
• The Email addresses for a maximum of four recipients
Note: You can use the Email feature to page an Email recipi-
ent who uses a text-based pager gateway. For more
information, see the description of the To Add res s set-
ting in Email recipients on page 57.
DNS server The Management Card cannot send any Email messages unless the
DNS server is defined. The TCP/IP & DNS (Web interface) or DNS
(Control Console) option in the Network menu accesses the set ting that
you use to identify the Domain Name Service (DNS) server by its IP
address.
If the Management Card does not receive a response from the DNS
server within five seconds, Email cannot be sent. Therefore, use a DNS
server that is on the same segment as the Management Card, or on a
nearby segment (but not across a WAN).
Once you define the DNS server’s IP address, verify that DNS is
working correctly by entering the DNS name of a computer on your
network to obtain the IP address for that DNS name.
SMTP settings The Email option in the Network menu accesses the following settings:
Continued on next page
Setting Description
SMTP Server The DNS name of the SMTP server.
From Address The contents of the From field in the Email messages sent by
the Management Card.
Note: The SMTP server’s configuration may require that you
use a valid user account on the server for this setting.
See the server’s documentation for more information.