Events Menu
How to Configure Individual Events continued
Event mask | Use the codes identified in the following table to configure an event. For | ||
| example, to configure the UPS on battery event, as follows: | ||
| • To configure it as a severe event, change the 1st character to 3. | ||
| • To log the event, and send traps to trap receivers 1 and 2, | ||
| change the 2nd character to B. | ||
| • To disable traps to receivers 3 and 4, and disable Email recipi- | ||
| ents 1 and 2, change the 3rd character to 0. | ||
| • To send Email only to Email recipient 3, change the 4th charac- | ||
| ter to 8. |
| |
| Note: The result would be a code of 3B0800. | ||
|
|
|
|
| Character |
| Event Mask Code Format |
|
|
| |
| 1st (Left- | Defines the severity code for the event. | |
| Most) | 0 | (0000): No severity |
|
| ||
|
| 1 | (0001): Informational |
|
| 2 | (0010): Warning |
|
| 3 | (0011): Severe |
|
|
| |
| 2nd | Defines whether the event is logged, and whether SNMP traps are | |
|
| sent to trap receivers 1 and 2. | |
|
| 0 | (0000): Disable logging and SNMP traps |
|
| 1 | (0001): Disable logging, send traps to receiver 2 |
|
| 2 | (0010): Disable logging, send traps to receiver 1 |
|
| 3 | (0011): Disable logging, send traps to both receivers |
|
| 8 | (1000): Enable logging, disable SNMP traps |
|
| 9 | (1001): Enable logging, send traps to receiver 2 |
|
| A (1010): Enable logging, send traps to receiver 1 | |
|
| B (1011): Enable logging, send traps to both receivers | |
|
|
| |
| 3rd | Controls the sending of SNMP traps to trap receivers 3 and 4, and | |
|
| Email notifications to Email recipients 1 and 2. | |
|
| 0 | (0000): Disable traps and Email |
|
| 1 | (0001): Disable traps, send Email to recipient 2 |
|
| 2 | (0010): Disable traps, send Email to recipient 1 |
|
| 3 | (0011): Disable traps, send Email to both recipients |
|
| 4 | (0100): Send traps to receiver 3, disable Email |
|
| 5 | (0101): Send traps to receiver 3, Email to recipient 2 |
|
| 6 | (0110): Send traps to receiver 3, Email to recipient 1 |
|
| 7 | (0111): Send traps to receiver 3, Email to both recipients |
|
| 8 | (1000): Send traps to receiver 4, disable Email |
|
| 9 | (1001): Send traps to receiver 4, Email to recipient 2 |
|
| A (1010): Send traps to receiver 4, Email to recipient 1 | |
|
| B (1011): Send traps to receiver 4, Email to both recipients | |
|
| C (1100): Send traps to both receivers, disable Email | |
|
| D (1101): Send traps to both receivers, Email to recipient 2 | |
|
| E (1110): Send traps to both receivers, Email to recipient 1 | |
|
| F (1111): Send traps to both receivers, Email to both recipients | |
|
|
| |
| 4th | Defines whether the event sends Email notifications to Email | |
|
| recipients 3 and 4. | |
|
| 0 | (0000): Disable Email |
|
| 4 | (0100): Send Email to recipient 4 |
|
| 8 | (1000): Send Email to recipient 3 |
|
| C (1100): Send Email to both recipients | |
|
|
| |
| 5th and 6th | Reserved for future use. Always map as 00. | |
|
|
|
|
Web/SNMP Management SmartSlot Card User’s Guide | 60 |
