Toshiba B-SX4T Parameter Setting Cont, Print Head Type Selection, System Mode Password Setting

2. PRINTER SETUP

ENGLISH VERSION EO1-33058

2.9 Setting an Operating Environment

2.9.1Parameter Setting (Cont.)

NOTE:

When the installed print head type is changed, this parameter should be also changed accordingly. Failure to do this may affect the print quality or print head life.

(30) Print Head Type Selection

This parameter is to choose the print head type that is actually installed. When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears.

<2>PARAMETER SET THERMAL HEAD V2

Use the [FEED] or [RESTART] key to select a desired option.

				Current type
		THERMAL HEAD	V1
[RESTART]				(TPH128R4)
				Enhanced type
	[FEED]	THERMAL HEAD	V2
				(TPH128R5)

After selecting a print head type, press the [PAUSE] key.

(31)System Mode Password Setting

This parameter is for system administrators only. Please do not change the setting for this parameter.

<2>PARAMETER SET PASSWORD OFF ----

Press the [PAUSE] key to return to the start of the Parameter Setting menu.

E2-31