Toshiba B-SX4T owner manual Pcmcia Cards, Paragraphs outline how to insert Pcmcia cards

2. PRINTER SETUP

ENGLISH VERSION EO1-33058

2.8 Inserting the Optional PCMCIA Cards

2.8Inserting the Optional When the optional PCMCIA Interface Board is installed into the printer, there will be a PCMCIA slot available as shown in the figure below.

PCMCIA Cards	This allows the use of a Flash Memory type card. The following
	paragraphs outline how to insert PCMCIA cards.

CAUTION!

1.To protect PC cards, discharge static electricity from your body by touching the metal cabinet of the printer before touching the card.

2.Before inserting or removing a PCMCIA card make sure that the printer’s power is turned off.

3.Be sure to protect PCMCIA Cards when not in use by putting them into their protective covers.

4.Do not subject the card to any shocks or excessive force nor expose the card to extremes in temperature or humidity.

5.The card may be inserted into the slot halfway even in the wrong orientation. However, the slot is safety designed so that the card will not seat against the connector pins.

NOTE:

Reading a read-only-type flash memory is possible if it has been used on the TOSHIBA printer, such as B-472 and B-572.

1.Make sure that the printer’s Power Switch is in the OFF position.

2.Hold the PCMCIA Card so that the side with the model name faces

right.

Eject Button

Model

Name

3.The following PCMCIA cards or equivalent can be used.

Type	Maker	Description			Remarks
ATA Card	San Disk,	A card conforming to the			----------
	Hitachi	PC card ATA standard
	Maxell	EF-4M-TB
			CC
	Maxell	EF-4M-TB	DC		Read/Write
	Centennial	FL04M-15-11119-03
	Technologies INC.
	INTEL	IMC004FLSA
Flash Memory	Simple	STI-FL/4A
	TECNOLOGY
Card (4 MB)	Mitsubishi	MF84M1-G7DAT01
	PC Card KING	FJN-004M6C
	MAX
					Read (See NOTE.)
	Centennial	FL04M-20-11138-67
	Technologies Inc.
	PC Card	FJP-004M6R
	Mitsubishi	MF84M1-GMCAV01
Flash Memory	Maxell	EF-1M-TB
				AA
Card (1 MB)	Mitsubishi	MF81M1-GBDAT01

E2-13