Toshiba B-SX4T Possible Problems Cont, Causes, Solutions, ⇒ Section, Refer to .1 Media and

5. TROUBLESHOOTING

ENGLISH VERSION EO1-33058

5.2 Possible Problems

5.2 Possible Problems (Cont.)

Possible Problems		Causes		Solutions
The printed image is	1.	The ribbon and media are not	1.	Select an appropriate ribbon for the
blurred.		matched.		media type being used.
	2.	The Print Head is not clean.	2.	Clean the print head using the Print
				Head Cleaner or a cotton swab slightly
				moistened with ethyl alcohol.
The cutter does not	1.	The Cutter Cover is not attached	1.	Attach the Cutter Cover properly.
cut.		properly.
	2.	The media is jammed in the Cutter.	2.	Remove the jammed paper.
			⇒ Section 4.1.3.
	3.	The cutter blade is dirty.	3.	Clean the cutter blade.
			⇒ Section 4.1.3.
The Strip Module does	Label stock is too thin or the glue is too		1.	Refer to Section 7.1 Media and
not remove labels from	sticky.			change the label.
the backing paper.			2.	Set the Pre-strip function to ON.
			⇒Section 2.9.1.

E5- 4