Toshiba B-SX4T Parameter Setting Cont, Baud Rate Selection, Data Length Selection, E2-17

2. PRINTER SETUP

ENGLISH VERSION EO1-33058

2.9 Setting an Operating Environment

2.9.1Parameter Setting (Cont.)

(3) Baud Rate Selection

This parameter is to choose a baud rate of the RS-232C interface. When the printer communicates with a host computer by serial interface, be sure to match the setting with the host.

When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears.

<2>PARAMETER SET

SPEED 9600bps

Use the [FEED] or [RESTART] key to select a desired option.

<Reference>

Properties screen of Serial (COM) port under Windows98

[RESTART]

[FEED]

SPEED 115200 bps

SPEED 38400 bps

SPEED 19200 bps

SPEED 9600 bps

SPEED 4800 bps

SPEED 2400 bps

After selecting a baud rate, press the [PAUSE] key.

(4) Data Length Selection

This parameter is to choose a communication data length of the RS-232C interface.

7 bits is used when transmitting alphanumeric data only. 8 bits is used to when transmitting special characters. Be sure to match a setting with a host computer.

When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears.

<2>PARAMETER SET DATA LENG. 8bits

Use the [FEED] or [RESTART] key to select a desired option.

[RESTART]

[FEED]

DATA LENG. 8bits

DATA LENG. 7bits

After selecting a data length, press the [PAUSE] key.

E2-17