Toshiba B-SX4T owner manual LAN Option B-9700-LAN-QM-R, Wireless LAN Option B-9700-WLAN-QM-R

APPENDIX 2 INTERFACE

ENGLISH VERSION EO1-33058

APPENDIX 2 INTERFACE

LAN (Option: B-9700-LAN-QM-R)

Physical Layer:	IEEE802.3 10BASE-T/100BASE-TX
Number of ports:	1
Connector:	RJ-45
LED status:	Link LED, Activity LED
		LED	LED Status
		Link	ON
	Link LED (Green)		OFF
Activity LED (Orange)
		Activity	ON
			OFF

LAN status

10Mbps link or 100Mbps link is detected. No link is detected.

*Communication cannot be made while the Link LED is off.

Communicating Idle

LAN cable:	10BASE-T: UTP category 3 or category 5
	100BASE-TX: UTP category 5
Cable length:	Segment length Max. 100 m

NOTES:

1.For IP address setting, refer to the B-SX4T/SX5T Series Key Operation Specification stored in the CD- ROM.

2.When a generally-used twisted pair Ethernet (TPE) or UTP cable is used, a communication error may occur depending on your operating environment. In such case, you may be requested to use a shielded twisted pair cable.

Wireless LAN (Option: B-9700-WLAN-QM-R)

Standard:	Conforming to IEEE802.11a, IEEE802.11b, and IEEE802.11g
Protocol:	IP (RFC791), ICMP (RFC792), UDP (RFC768), TCP (RFC793,896), ARP
	(RFC826), HTTPD (RFC1866), TELNET, FTPD (RFC959), DHCP (RFC2131),
	SNMP
Security protocol:	WEP (64 bits/128 bits/152 bits) or AES, AES-OCB (128 bits)
	TKIP (only when using WPA, WPA-PSK)
	TWSL (unique encryption)
Antenna:	Chip type, diversity antenna
Parameter setting:	via HTTP
Default IP address:	192.168.10.21
Default subnet mask:	255.255.255.0

NOTE:

MAC address of the Wireless LAN module will be necessary when setting the MAC address filtering function of an access point. Please ask a service person of your nearest TOSHIBA TEC service representative.

EA2- 4