Toshiba B-SX4T Base LAN Board is being, Initialized Printer did not succeed in writing

APPENDIX 1 MESSAGES AND LEDS

ENGLISH VERSION EO1-33058

APPENDIX 1 MESSAGES AND LEDS

		LED Indication				Restoration by	Acceptance of
No.	LCD Message				Printer Status	RESTART key	Status Request
		POWER	ONLINE	ERROR		Yes/No	Reset Command
							Yes/No
					When the following abnormal operations	No	No
					are performed, a system error occurs:
					(a) Command fetch from an odd address
					(b) Access to word data at an odd
					address
					(c) Access to long-word data at an odd
					address
22	SYSTEM ERROR		z		(d) Access to the area of 80000000H to
					FFFFFFFFH in the logic space in
					user mode.
					(e) An undefined instruction in an area
					other than a delay slot was decoded.
					(f) An undefined instruction in a delay
					slot was decoded.
					(g) An instruction to rewrite a delay slot
					was decoded.
23	100BASE LAN		z	z	100 Base LAN Board is being	-----	-----
	INITIALIZING…				initialized.
					The printer did not succeed in writing	Yes	Yes
24	RFID WRITE ERROR		z		data onto an RFID tag after having
					retried for a specified times.
25	RFID ERROR		z		The printer cannot communicate with	Yes	Yes
					the RFID module.
26	INPUT PASSWORD		z	z	The printer is waiting for a password to	No	No
					be entered.
27	PASSWORD INVALID		z	z	A wrong password was entered	No	No
	Please Power OFF				consecutively for three times.

NOTE: When an error message listed above appears on the LCD message display, please refer to Section 5 TROUBLESHOOTING for solution.

EA1- 2