American Standard 7055.105, 705.205, 7055.115, 705.215, 7056.215, 7056.105 Faqs, General Cleaning Fig

Page 8

7CHANGE HOT LIMIT SETTING FROM 95% TO 85%; Fig. 13

1.Remove the FAUCET COVER (1) by unthreading the LEVER SCREW (2) and pulling off the LEVER HANDLE (3). Unthread the FAUCET COVER SCREW

(4) at the back of the FAUCET. Pull FAUCET COVER

(1) up and off. See Fig. 2 in this section.

2.Replace LEVER HANDLE and rotate

counter-clockwise to its stop position (100% cold). Remove HANDLE.

3.Pull out LIMITER STOP (1) from the VALVE STEM (2).

4.Rotate LIMITER STOP (1) 180 degrees and insert back onto VALVE STEM (2).

5.Replace FAUCET COVER (1) and LEVER HANDLE

(3). Install LEVER HANDLE SCREW (2), FAUCET COVER SCREW (4) and tighten. See Fig. 2 in this section.

8GENERAL CLEANING; Fig. 14

1.For general cleaning use a damp, soft cloth to clean the spout and the sensor.

2.For cleaning dirt use a soft cloth with diluted dish washing detergent. Wipe the area using a wet cloth and dry using a soft cloth.

CAUTION

Do not scratch the sensor when cleaning.

Avoid using anything that may scratch the spout surface. Never use polishing power, detergent or a nylon scrub brush. They will damage the surface of the spout or Sensor.

2

3

9

8

SLOT

ROTATE 180˚

Fig. 13

SLOT

1

 

 

 

Fig. 14

FAQ'S

Q:How will I know if battery needs to be replaced?

A:Valve does not open and sensor blinks 2 times interrupted by pause for up to 7 days.

Q:Why has the flow rate of the faucet reduced significantly?

A:Check and clean aerator and strainer.

Q:There is no flow out of faucet when I'm in the sensor range?

A:Check sensor. If sensor blinks 2 times interrupted by pause, replace battery, or call 1 800-442-1902.

Q:What is the normal operating pressure range?

A:Faucet will operate with supply pressures ranging from 20-80 psi.

7

M965255 REV. 1.6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Installation Instructions Unpacking Less MixingInstallation Roughing-in DimensionsConnect Power Supply a 7056 series only Tools Required FigMaintenance Install Optional Mixing Valve FigMake Water Supply Connections Fig Handwash Sensor Operation FigHOW to Change Sensor Range Factory set at 6 Fig HOW to Install and Change Battery Fig HOW to Replace SensorHOW to Clean Filter Screen on Solenoid Valve HOW to Replace Diverter CartridgeChange HOT Limit Setting from 95% to 85% Fig FaqsGeneral Cleaning Fig Selectronic Proximity Integrated Faucet With Above-Deck Mixing

7055.105, 7055.115, 7056.205, 705.205, 7056.215 specifications

The American Standard 7056.205, 7056.105, 7055.105, 7056.215, and 705.205 are part of a distinguished line of bathroom products designed with both aesthetic appeal and functional efficiency in mind. These products exemplify modern bathroom design while utilizing advanced technologies to enhance user experience and longevity.

One of the standout features of these models is their innovative water-saving technology. With an emphasis on sustainability, each product is engineered to reduce water consumption without sacrificing performance. This translates to significant savings on water bills and a reduced environmental footprint. The integrated flushing systems are designed for powerful performance, ensuring a clean flush every time while maintaining efficiency.

Comfort and ergonomics are paramount in the design of these toilets. The height of the bowls is optimized for ease of use, making them accessible for users of all ages and abilities. Models like the 7056.205 and 7056.105 come with elongated bowls, providing extra space and comfort compared to traditional round bowls, appealing to users who prioritize comfort in their bathroom experience.

Another key characteristic of these models is their ease of installation and maintenance. The designs incorporate a straightforward installation method, allowing homeowners and contractors to set them up with minimal hassle. Additionally, the surfaces of these products are crafted from high-quality materials that resist stains and facilitate easy cleaning, ensuring that they maintain their sleek appearance over time.

The aesthetics of the American Standard 7056 series are as compelling as their functionality. Available in various finishes, these products can fit seamlessly into various bathroom styles, from modern minimalistic to classic decor. The smooth lines and elegant profiles provide a touch of sophistication that enhances any bathroom setting.

Safety features are also integrated into the designs, with some models equipped with anti-slip surfaces and sturdy construction. These considerations not only add to the overall user experience but also ensure that the products adhere to industry standards for safety and durability.

In summary, the American Standard 7056 series—including the 7056.205, 7056.105, 7055.105, 7056.215, and 705.205—stands out in the market for its blend of innovative features, stylish design, and a commitment to sustainability. Whether for a remodel or new construction, these products offer a dependable choice for consumers looking to elevate their bathroom experience with quality and efficiency.
Top Page Image Contents