American Standard 7420.821 90˚, Install Handles, Test Installed Fitting, Check Drain Connections

Page 4

10 INSTALL HANDLES

 

 

 

Push ADAPTER (1) on VALVE STEM (2), so that the hole of the

 

 

ADAPTER (1) with the spline is facing up. Fig. A. Tighten

 

THREAD ON

STEM SCREW (3) to secure ADAPTER (1).

 

 

 

4

TO DECK

 

 

ADAPTER

Find correct position of LEVER HANDLE ASSEMBLY (4) by adjusting

 

 

male teeth on ADAPTER (1) to female teeth in HANDLE (4).

SPLINE

 

 

 

END UP

1

Thread LEVER HANDLE ASSEMBLY (4) onto DECK ADAPTER (5)

 

until snug against mounting surface.

 

Fig. A.

3

 

 

 

 

 

2

 

 

BOTTOM

5

 

 

 

11 TEST INSTALLED FITTING

 

5

 

With HANDLES (1) in OFF position, turn on WATER

 

1

SUPPLIES (2) and check all connections for leaks.

 

 

Remove AERATOR (3).

 

 

 

Operate both HANDLES (1) to flush water

1

 

 

lines thoroughly.

 

 

Replace AERATOR (3).

12 CHECK DRAIN CONNECTIONS

Operate POP-UP KNOB (5) and fill Sink with water. Check that DRAIN STOPPER (4) makes a good seal and retains water in Sink. If STOPPER (4) does not seal properly, please refer to “Troubleshooting Guide” in these instructions.

Release POP-UP KNOB (5) down and check all drain connections and "P" trap for leaks. Tighten

if necessary.

3

4

WASTE

OUTLET

2

COLD

HOT

“P” TRAP

2

13 CARE INSTRUCTIONS:

DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER.DRY WITH A SOFT COTTON FLANNEL CLOTH.

DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH WITH A COARSE SURFACE.

14 SERVICE (all models)

 

 

 

HANDLE

 

 

 

 

ASSEMBLY

To change direction of handle rotation,

 

 

 

 

proceed as follows:

UNTHREAD

 

 

Turn valve to OFF position. Unthread HANDLE

 

 

 

 

 

 

BASE (1) from DECK ADAPTER (2).

 

1

 

 

Pull HANDLE ASSEMBLY off VALVE STEM (3).

 

 

 

Remove SPRING CLIP (4). Lift STOP WASHER (5),

 

 

 

turn 90˚ and replace. Replace SPRING CLIP (4).

 

 

90˚

3

Find correct position of HANDLE ASSEMBLY by adjusting

male teeth on VALVE STEM (3) to female teeth in HANDLE.

 

5

Thread HANDLE ASSEMBLY onto DECK ADAPTER (2)

 

 

until snug against mounting surface.

 

4

 

 

If spout drips, operate handles several times from

2

 

 

 

OFF to ON position. Do not force - handles turn

 

 

 

 

only 90˚.

 

 

M965015 REV. 1. 7

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Install Spout 1A Install Valve BodySpread Lavatory Faucet With Speed Connect DrainBody. Fig. a POP-UP DrainRemove Flange Drain OutletAttach Cable Connector Check Operation of POP-UPMake Water Supply and Waste Connections ColdInstall Handles Test Installed Fitting90˚ Check Drain ConnectionsTroubleshooting Guide Cable Adjustment ProcedureLocked Mode Vandal Proof Unlocked Mode Fig. H7420.801 7420.821 Series 7415.801 7415.821

7415.821, 7415.801, 7420.801, 7420.821 specifications

The American Standard 7420.821, 7420.801, 7415.801, and 7415.821 are premium toilet models designed for exceptional performance and unparalleled comfort. These toilets reflect the brand's commitment to innovative design and advanced technology, ensuring an elevated bathroom experience.

The 7420.821 and 7420.801 models are known for their sleek and modern aesthetics, seamlessly fitting into a variety of bathroom decors. The elongated bowl design offers added seating comfort, making it an excellent choice for both residential and commercial use. Additionally, these models are equipped with the patented EverClean surface, a unique feature that inhibits the growth of stain and odor-causing bacteria, ensuring that the toilet remains cleaner for longer periods.

On the other hand, the 7415.801 and 7415.821 toilets are engineered for efficiency and performance. Both models feature a powerful flush system that utilizes high-efficiency flushing technology, ensuring a strong flush while using less water. This water-saving capability is part of American Standard's commitment to sustainability, helping users to reduce their water consumption without sacrificing performance.

A notable characteristic across these models is the cri ra anti-siphon tank technology, which prevents contamination of the home’s water supply by ensuring that wastewater cannot flow back into the clean water system. This safety feature is crucial for maintaining hygiene and health standards in any bathroom.

Furthermore, the installation of these toilets is simplified through the use of standard toilet dimensions and a straightforward mounting system. This ease of installation means less time and effort spent on setup, making them a favored choice among homeowners and contractors alike.

In terms of comfort, each of these models offers options for different seat heights, accommodating a wider range of users. This feature is particularly beneficial for individuals with mobility challenges, as it allows for easier sitting and standing.

Overall, the American Standard 7420.821, 7420.801, 7415.801, and 7415.821 toilets combine cutting-edge technology, sustainable practices, and ergonomic design, making them a smart choice for anyone looking to upgrade their bathroom facilities while ensuring maximum comfort and cleanliness.
Top Page Image Contents