Attach Cable Connector, Cold | American Standard 7420.801, 7420.821

7 ATTACH CABLE CONNECTOR

Thread CABLE CONNECTOR (1) clockwise onto DRAIN BODY CONNECTION (2) and hand tighten. Fig. A.

Your new POP-UP DRAIN installation is now complete. Fig. B.

Note: Tailpeice on pop-up drain is 1-1/4” O.D.

Fig. B.

Fig. A.

Fig. B.

1-1/4” O.D.

8 CHECK OPERATION OF POP-UP

Operate LIFT KNOB (1) to verify that STOPPER (2) opens and closes.

Note: If STOPPER (2) does not open and close properly then refer to the “troubleshooting section” of these instructions.

9 MAKE WATER SUPPLY AND WASTE CONNECTIONS

NOTE: FLEXIBLE SUPPLIES OR BULL-NOSE RISERS NOT INCLUDED AND MUST BE PURCHASED SEPARATELY.

Thread TEE BODY (4) to SPOUT SHANK (5).

Thread HOSE CONNECTOR (6, 6A) to VALVE CONNECTIONS (7, 7A).

Connect water supply to VALVE BODIES (1,1A) with 1/2" IPS FLEXIBLE SUPPLIES (2) or 3/8" O.D. BULL-NOSE RISERS (3). Use

adjustable wrench to tighten connections. Do not over tighten. Be careful not to kink copper supply when bending. Use tubing

cutter to cut to proper length.

Connect HOT water supply to inlet of left SHANK and COLD water supply to right SHANK using sealant, appropriate connectors, and COUPLING NUTS.

Connect 1-1/4” O.D. tailpiece on POP-UP DRAIN to		1
waste outlet.		1	7
			7
	1/2" PIPE THREAD		6
		2	WASTE
		2	OUTLET

FLEXIBLE

SUPPLIES

HOT

5	1A
	1A
	7A
	6A
	COUPLING
	NUT

43/83O.D.

BULL-NOSE RISERS

COMPRESSION

NUT

FERRULE

COLD

3/8 COMPRESSION
CONNECTION	M965015 REV. 1. 7
	M965015 REV. 1. 7

7415.821, 7415.801, 7420.801, 7420.821 specifications

The American Standard 7420.821, 7420.801, 7415.801, and 7415.821 are premium toilet models designed for exceptional performance and unparalleled comfort. These toilets reflect the brand's commitment to innovative design and advanced technology, ensuring an elevated bathroom experience.

The 7420.821 and 7420.801 models are known for their sleek and modern aesthetics, seamlessly fitting into a variety of bathroom decors. The elongated bowl design offers added seating comfort, making it an excellent choice for both residential and commercial use. Additionally, these models are equipped with the patented EverClean surface, a unique feature that inhibits the growth of stain and odor-causing bacteria, ensuring that the toilet remains cleaner for longer periods.

On the other hand, the 7415.801 and 7415.821 toilets are engineered for efficiency and performance. Both models feature a powerful flush system that utilizes high-efficiency flushing technology, ensuring a strong flush while using less water. This water-saving capability is part of American Standard's commitment to sustainability, helping users to reduce their water consumption without sacrificing performance.

A notable characteristic across these models is the cri ra anti-siphon tank technology, which prevents contamination of the home’s water supply by ensuring that wastewater cannot flow back into the clean water system. This safety feature is crucial for maintaining hygiene and health standards in any bathroom.

Furthermore, the installation of these toilets is simplified through the use of standard toilet dimensions and a straightforward mounting system. This ease of installation means less time and effort spent on setup, making them a favored choice among homeowners and contractors alike.

In terms of comfort, each of these models offers options for different seat heights, accommodating a wider range of users. This feature is particularly beneficial for individuals with mobility challenges, as it allows for easier sitting and standing.

Overall, the American Standard 7420.821, 7420.801, 7415.801, and 7415.821 toilets combine cutting-edge technology, sustainable practices, and ergonomic design, making them a smart choice for anyone looking to upgrade their bathroom facilities while ensuring maximum comfort and cleanliness.