American Standard 2064.90X Install Handles, Male teeth on Adapter 1 to female teeth in Handle

Page 2

3 VALVE ASSEMBLY

Install LOCKNUTS (1) and RUBBER WASHERS (2) onto valve shanks.

Push TUBING (3) ends into VALVE (4) side outlets. Insert VALVES (4) into mounting holes from underside of ledge.

Press TEE (5) onto SPOUT SHANK (6) making certain that the O-RING (7) is properly seated on SHANK (6). Push COUPLING (8) into TEE (5) and attach to SPOUT SHANK (6) and tighten using a 10mm (3/8'') hex wrench. Tighten COUPLING (8) using a 10mm (3/8") Hex wrench. (FOR 2064.901). Use COUPLING (8a) for fitting less spray.

Thread of VALVE BODY (4) should extend at least 5/16 inch above MOUNTING SURFACE (11). If necessary, adjust LOCKNUT (1).

9

10

11MOUNTING

SURFACE

9

Place RUBBER RING (10) into ESCUTCHEON ADAPTERS (9) and thread onto

 

valves until snug against internal stop.

10

Tighten LOCKNUT (1) with WRENCH supplied to secure VALVE (4) position.

Slide FERRULE (12) and COUPLING NUT (13) to outlet of VALVE (4) and tighten COUPLING NUT (13) firmly.

Connect HOT water supply to inlet of left VALVE and COLD water supply to inlet of right VALVE using appropriate connector.

9

10

HOT

4

 

 

7

12

13

6

 

 

 

5/16'' MIN.

4

11

2

Wrench

1

MOUNTING

3

12

4

 

 

 

 

 

SURFACE

 

5

 

 

 

 

8a

 

8

 

 

 

13

COLD

4 INSTALL HANDLES

 

 

 

Push ADAPTER (1) on VALVE STEM (2). See figure "A". Tighten

 

 

 

STEM SCREW (3) to secure ADAPTER (1).

 

 

THREAD ON

 

 

 

TO DECK

Find correct position of LEVER HANDLE ASSEMBLY (4) by adjusting

 

4

ADAPTER

 

 

male teeth on ADAPTER (1) to female teeth in HANDLE (4).

SPLINE

 

 

 

 

TOP

Thread LEVER HANDLE ASSEMBLY (4) onto DECK ADAPTER (5)

END UP

 

 

 

 

 

 

until snug against mounting surface.

 

 

1

 

Figure "A"

 

3

 

 

2

 

 

 

5

5 SERVICE

To change direction of handle rotation, proceed as follows:

Turn valve to OFF position.

Thread counter-clock wise HANDLE BASE (1) to remove HANDLE ASSEMBLY (2) from ESCUTCHEON BASE (3).

Use a flat blade screw driver to remove SPRING CLIP (4).1 2

Lift STOP WASHER (5), turn 90˚ and replace.

Replace SPRING CLIP (4). Reinstall HANDLE ASSEMBLY (2).

If spout drips, operate handles several times from OFF to ON position. Do not force - handles turn only 90˚.

VALVE

5

90˚

 

4

3

M968830 Rev . 1 . 4

Page 1 Page 3
Image 2
Page 1 Page 3
Contents SERIN2064.90X Spout AssemblyPrepare Tube and TEE Assembly Escutcheon RingService Install HandlesThread Lever Handle Assembly 4 onto Deck Adapter Male teeth on Adapter 1 to female teeth in HandleRing 7A Test Installed FaucetMake Water Supply Connections Unthread Shank Sleeve 7 and remove from Shank295 2064.90XReplace the YYY with appropriate finish code
Related manuals
Manual 3 pages 58.89 Kb

2064.90X specifications

The American Standard 2064.90X is a prominent model in the world of bathroom fixtures, specifically designed to offer enhanced functionality, comfort, and aesthetic appeal. Built with the needs of modern homeowners in mind, this product stands out due to its robust features and innovative technologies.

One of the main characteristics of the 2064.90X is its spacious design. The model boasts a generous size that provides ample room for users, ensuring comfort during everyday use. Its ergonomic shape is not only visually pleasing but also supports a better user experience.

A key feature of this model is the high-quality materials used in its construction. The American Standard brand is known for its commitment to durability, and the 2064.90X is no exception. It is made from top-tier vitreous china, which is not only resistant to chipping and scratching but also easy to clean. This makes maintenance a breeze, making it an ideal choice for busy households.

The 2064.90X also integrates advanced flushing technologies. It is equipped with a powerful, yet efficient, flushing system that ensures optimal performance while conserving water. The model's design promotes a clean flush for every use, significantly reducing the chances of clogs and frequent maintenance.

In terms of environmental considerations, the 2064.90X aligns with modern eco-friendly standards. It features a water-saving design that helps reduce water consumption without compromising performance. This focus on sustainability makes it an attractive option for environmentally conscious consumers.

Another noteworthy aspect of the American Standard 2064.90X is its stylish appearance. The clean lines and elegant design make it a fitting addition to any bathroom decor. Whether you have a contemporary or traditional style, this model adds a touch of sophistication to your space.

Lastly, the installation of the 2064.90X is straightforward, making it accessible for both professional plumbers and DIY enthusiasts. With its standard size and compatibility with most plumbing configurations, it ensures a hassle-free setup process.

In summary, the American Standard 2064.90X combines comfort, durability, and style, making it an excellent choice for anyone looking to upgrade their bathroom fixtures. Its advanced technologies and environmental considerations further enhance its appeal, providing value to homeowners and the planet alike.
Top Page Image Contents