American Standard 4114.1 Check Connections for Leaks, Service, HOT Limit Safety Stop Adjustment

Page 4

5 CHECK CONNECTIONS FOR LEAKS.

Move HANDLE down into "off" position.

Turn on water supplies and check connections for leaks.

Operate HANDLE (2) up and down, left and right to flush water lines thoroughly.

Operate HAND SPRAY and check connections for leaks.

CHECK CONNECTIONS

FOR LEAKS

6 SERVICE

If faucet drips, operate HANDLE several times from "off" to "on." Do not apply excessive force.

Clogged CARTRIDGE outlets or inlets may cause reduced flow.

To clean, first turn off water supply then:

Remove INDEX BUTTON (1), loosen HANDLE SCREW (2) and remove HANDLE (3).

 

 

 

Pull off ESCUTCHEON CAP (4). Unscrew three MOUNTING SCREWS (5).

 

 

 

Lift CARTRIDGE (6) off MANIFOLD (7) and remove CARTRIDGE SEALS (8).

2

 

3

Clean MANIFOLD (7), CARTRIDGE (6) ports and SEALS (8).

 

 

 

Place SEALS (8) into CARTRIDGE PORTS (6A).

1

 

4

Place CARTRIDGE (6) onto MANIFOLD (7) and tighten MOUNTING

 

 

 

SCREWS (5) alternately.

 

 

 

Replace ESCUTCHEON CAP (4), HANDLE (3), tighten HANDLE

 

 

5

SCREW (1) and install INDEX BUTTON (2).

 

 

HOT LIMIT SAFETY STOP ADJUSTMENT

 

 

6

By restricting handle rotation and limiting the amount of hot water allowed

 

 

 

6A

 

to mix with the cold, the HOT LIMIT SAFETY STOP reduces risk of accidental

 

8

scalding. To set the maximum hot water temperature of your faucets, all you

 

 

 

 

 

need to do is adjust the setting on the HOT LIMIT SAFETY STOP.

 

7

 

Remove HANDLE BUTTON (1) and loosen SET SCREW (2). Pull HANDLE (3) off valve stem. Pull off CAP (4). Use a flat blade screwdriver or your fingers to pull up and rotate red HOT LIMIT SAFETY STOP (5). Follow Step "A" or "B" to adjust min./max. discharge temperature. "0" being the hottest to "7" the coldest temperature setting. Factory set at "0".

Replace ESCUTCHEON CAP (4), HANDLE (3), tighten HANDLE SCREW (1) and install INDEX BUTTON (2).

"A"

PRY RED RING FORWARD AND ROTATE COUNTER- CLOCKWISE ONE CLICK

TEMPERATURE

SETTING NUMBERS

"B"

 

PRY RED RING FORWARD

 

AND ROTATE CLOCKWISE

"B"

"B"

 

ADJUSTMENT WHEN

 

WATER IS TOO COLD

 

 

 

 

 

 

"A"

 

 

 

 

 

"A"

 

 

 

 

0

ADJUSTMENT WHEN

 

 

 

1

 

 

4

 

2

 

 

WATER IS TOO HOT

3

 

 

 

5

 

 

 

 

 

6

 

 

 

 

6

 

 

 

 

 

5

"RED RING"- HOT LIMIT SAFETY STOP

7 CARE INSTRUCTIONS:

DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.

DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH WITH A COARSE SURFACE.

M968470 REV. 1. 4

Page 3 Page 4
Image 4
Page 3 Page 4
Contents Installation Instructions Install Faucet with or Without Deck EscutcheonInstallation Instructions Test Installed Faucet Make Water Supply ConnectionsLeft supply to Hot Marked with a Red Line Connect Spray HoseService HOT Limit Safety Stop AdjustmentCheck Connections for Leaks Clogged Cartridge outlets or inlets may cause reduced flow

4114.1 specifications

The American Standard 4114.1 is a high-quality toilet model that embodies a blend of efficiency, comfort, and advanced features designed to enhance the user experience. This toilet is a popular choice among homeowners and contractors looking for reliability and performance in bathroom fixtures.

One of the standout features of the American Standard 4114.1 is its WaterSense certification, which signifies that it meets stringent efficiency guidelines set by the U.S. Environmental Protection Agency. This toilet utilizes only 1.28 gallons per flush (GPF), significantly reducing water consumption compared to traditional models that use up to 1.6 GPF. This not only helps in conserving water but also leads to savings on water bills, making it an eco-friendly choice.

The design of the 4114.1 is both functional and aesthetically appealing. It features a sleek, one-piece construction that offers a modern look while ensuring easy cleaning and maintenance. The compact design is perfect for smaller bathrooms, maximizing space without compromising on comfort. The elongated bowl provides added comfort, making it suitable for users of all ages.

In terms of technology, the American Standard 4114.1 incorporates an advanced flushing system that ensures powerful and efficient waste removal. The siphonic action is designed to prevent clogs, providing a reliable flush every time. Additionally, the toilet’s EverClean surface has a special glaze that inhibits the growth of stain and odor-causing bacteria, mold, and mildew, ensuring that the toilet remains cleaner for longer periods.

Installation of the American Standard 4114.1 is straightforward, with a standard height that accommodates most users comfortably. The toilet comes with a customizable height option as well, catering to individuals with mobility challenges. This versatility makes it an ideal choice for households seeking a user-friendly toilet solution.

Overall, the American Standard 4114.1 is a well-rounded toilet that combines efficiency, comfort, and modern design. Its WaterSense certification, innovative flushing technology, and easy maintenance features make it a smart investment for any bathroom renovation or new construction project. With a focus on sustainability and user comfort, the 4114.1 stands out as a preferred option in the realm of modern toilets.
Top Page Image Contents