Maintenance, Filter, Plastic Post | Craftsman 113.177135 manual

Maintenance

Filter

WARNING: To reduce the risk of I

injury from accidental starting, unplug power cord before changing

or cleaning filter.

Your filter should be cleaned often to maintain peak vac performance.

Easy to Replace Filter

1.Extend the retainer band around the plastic posts on the lid.

2.Remove filter bag off the filter cage.

3.Place the replacement filter on the filter

cage until open end touches bottom of rid.

4.Release the retainer band from the

plastic post on the lid, holding the filter bag secure to the lid.

5.Make sure the retainer band is positioned on the filter bag covering the black printed line.

Handle to

Remove Motor

Cover

Retainer Band

;i:se of Vac

Take the dirty filter to a disposal container and gently brush away small dirt particles that may be adhering to the filter material.

IMPORTANT: After cleaning, check the filter for tears or small holes. Do not use a filter with holes or tears in it. Even a small hole can cause a lot of dust to come out of your vac. Replace it immediately.

Installation

New filters may be purchased at area

Sears retail stores, Sears retail replacement filters ar sold by stock no. 9-16949.

NOTE: Before installing the filter on the vac, clean the area of the lid so that the retainer band wilt seal the bag against the lid and stop small particles from bypassing the filter bag.

If the filter is clean and not damaged, replace it on the filter cage. tf it cannot be reused, place a new filter over the filter cage.

Replace the retainer band around the filter. Make sure the retainer band is positioned on the filter, and the filter completely covers the filter cage. Also, make sure the edges of the filter are completely secured under the retainer band.

NOTE: Clean the filter in an open area. Cleaning should be done outdoors and not in the living quarters.

Plastic Post_

IMPORTANT: To avoid damage to the

blower wheel and motor, always reinstall the filter before using the vac for dry

material pick-up.

WARNING: Do not remove the filter

cage. It is there to help prevent your fingers from getting into the blower wheel.

113.177135 specifications

The Craftsman 113.177135 is a versatile and dependable table saw designed for both professionals and DIY enthusiasts alike. With its robust construction and thoughtful features, it stands out in the woodworking community as an ideal tool for precision cutting and efficient performance.

One of the standout features of the Craftsman 113.177135 is its powerful motor. Equipped with a 1.5 HP motor, this table saw offers ample power to handle a variety of materials, from softwoods to hardwoods. The motor delivers a consistent and reliable performance, allowing users to make clean and accurate cuts with ease.

The saw’s 10-inch blade is another key characteristic that enhances its cutting capabilities. It can easily perform rip cuts, cross cuts, and bevel cuts, making it a versatile addition to any workshop. The blade can be adjusted to different angles, enabling users to achieve the desired cut for various applications.

In terms of construction, the Craftsman 113.177135 features a sturdy cast iron table, which provides a stable and flat surface for accurate measurements. This durability not only enhances precision but also contributes to the longevity of the tool. Additionally, the table’s extension wings increase the working surface, allowing for larger workpieces and improved stability during cutting.

Safety is a priority in the design of the Craftsman 113.177135, and it comes equipped with various safety features. The blade guard is easily removable, ensuring that users can switch between tasks without hassle, while a riving knife minimizes the risk of kickback, a common concern with table saws.

The onboard storage is another thoughtful addition, providing a convenient place for storing accessories like the miter gauge, push stick, and wrenches. This keeps the workspace organized and ensures that essential tools are always within reach.

Overall, the Craftsman 113.177135 combines power, precision, and safety into a compact design perfect for a variety of woodworking projects. Its robust performance, durable construction, and focus on user-friendly features make it a valuable investment for anyone looking to elevate their woodworking skills, whether for professional use or personal projects.