Frigidaire FRA144HT2 Home Comfort Specifications, New Installation, Replacement Installation

Page 3

Home Comfort

FRA144HT2 Through-The-Wall Air Conditioner

Plug Type (NEMA)

6-15P

Home Comfort Specifications

Product Shipping Weight (approx.) – 93 Lbs.

Single phase 3-wire cable, 240 / 208 Volt, 60 Hertz AC only electrical supply with ground required on separate circuit fused on both sides of line.

Amps @ 240 / 208 Volts = 7.4 / 8.4 Amps

Recommended Circuit Breaker – 15 Amps

Unit equipped with 240 / 208V 3-wire power supply cord, NEMA plug type 6-15P, approximately 72" long.

Unit’s increased performance characteristics result from two rear intakes. For unit to operate at maximum efficiency, carefully follow complete, detailed new or replacement installation instructions provided in Product Installation Guide on web.

Unit requires rearward slope when installation is complete, to allow condensate to drain from rear of sleeve.

New Installation

For new installation, Frigidaire® Through-The-Wall 18" Sleeve Kit PN # EA108T available. Recommended for proper installation.

Through-the-wall installation requires 18" maximum wall thickness.

For energy-saving purposes, install unit in shady location, preferably a northern exposure; and do not block airflow inside with blinds, curtains or furniture; or outside with shrubs, enclosures or other buildings.

Replacement Installation

When replacing existing air conditioner with new unit, refer to Product Installation Guide on web to identify existing wall-sleeve manufacturer and size compatibility. If proper installation and slope are suspect, then correct installation of Frigidaire® Through-The-Wall 18" Sleeve Kit PN # EA108T recommended.

Use of existing wall sleeve to mount new unit requires original sleeve be in sound structural condition with rear grille that attaches securely, or rear flange that serves as stop for unit.

Preferable installation option, for increased efficiency and possibility of drafts reduced, requires existing rear grille (mounted to sleeve) be replaced with new unit’s rear air-directional louvered grille (provided in accessory kit, shipped with unit). Non-preferable installation option of directly mounting rear louvered grille to unit can be considered, requiring grille be mounted to unit prior to sleeve installation.

Existing decorative exterior grille may be left in place, provided that proper air-directional rear louvered grille is installed.

For installation into larger existing sleeve, optional Trim Kit PN # EA120T available.

Note: For planning purposes only. Refer to Product Installation Guide on the web at frigidaire.com for detailed instructions.

Optional Accessories

Through-The-Wall 18" Sleeve Kit – (PN # EA108T).

Trim Kit (for larger existing sleeve) – (PN # EA120T).

Architectural-Style Exterior Louvered Grille – (PN # EA109T).

USA 10200 David Taylor Drive Charlotte, NC 28262 1-800-FRIGIDAIRE frigidaire.com

Specifications

CANADA 5855 Terry Fox Way Mississauga, ON L5V 3E4 1-800-265-8352 frigidaire.ca

subject to change.

FRA144HT2 04/11

© 2011 Electrolux Home Products, Inc.

Printed in the U.S.A.

Image 3
Contents Effortless Remote Temperature Control Remote Control Effortless Clean FilterReady-Select Controls Product Dimensions FeaturesOptional Accessories SpecificationsOptional Accessories Home Comfort SpecificationsNew Installation Replacement Installation
Related manuals
Manual 12 pages 21.45 Kb

FRA144HT2 specifications

The Frigidaire FRA series of air conditioners, including models FRA08EHT1, FRA124HT2, FRA106HT2, FRA144HT2, and FRA086HT1, provide effective cooling solutions for various room sizes while offering a range of features aimed at enhancing user experience and comfort.

The FRA08EHT1 is designed for smaller spaces, with a cooling capacity of 8,000 BTUs. It features a compact design and is suitable for rooms up to 350 square feet. Its Energy Saver mode helps in reducing electricity costs by limiting compressor run time while its programmable timer allows users to set the unit to turn on or off at specified times.

Stepping up in capacity, the FRA124HT2 offers 12,000 BTUs of cooling power, making it suitable for rooms up to 550 square feet. This model includes both cooling and heating capabilities, providing year-round comfort. Its multi-speed fan allows users to customize airflow while the built-in air ionizer improves indoor air quality by reducing airborne particles.

The FRA106HT2 is similar to the FRA124HT2 in performance, providing 10,000 BTUs of cooling for medium-sized rooms. It offers quiet operation, thanks in part to its sound-dampening features, making it ideal for bedrooms or home offices. The adjustable airflow direction ensures effective cooling distribution, and its remote control adds convenience for adjusting settings from a distance.

For larger spaces, the FRA144HT2 stands out with its robust 14,000 BTU cooling capacity. It is capable of cooling areas up to 700 square feet, making it suitable for living rooms or open floor plans. This model features advanced temperature controls and a digital display that allows users to monitor and adjust settings easily. The energy-efficient design helps keep operating costs low.

Lastly, the FRA086HT1 is another versatile option, providing 8,000 BTUs and combining both cooling and heating functions. Its compact size caters to smaller to medium rooms while offering the benefit of an adjustable thermostat and easy-to-use controls.

All models in the Frigidaire FRA series prioritize energy efficiency, ensuring users benefit from effective cooling while minimizing environmental impact. With features like a washable filter for easy maintenance and user-friendly controls, these air conditioners are designed to meet diverse needs while providing a comfortable and refreshing indoor environment.