Intelligent power module | Mitsubishi Electronics MSY-ANA, MS-AWA

4.Intelligent power module

IPM consists of the following components

· IGBT (x6)	: Converts DC waveform to three-phase AC waveform and outputs it.
· Drive Circuit	: Drives transistors.
· Protection circuit	: Protects transistors from overcurrent.

Since the above components are all integrated in IPM, IPM has a merit to make the control circuit simplify and miniaturize.

5.Elimination of electrical noise

NOISE FILTER CIRCUIT, which is formed by *CMC COILS capacitors placed on the POWER P.C. board, eliminates electri- cal noise of AC power that is supplied to main power supply circuit. And this circuit prevents the electrical noise generated in the inverter circuit from leaking out.

*CMC COILS; Common mode choke coils

MUZ-A24 MUY-A24 MUZ-D MUY-D

1.At the start of operation

Main power supply circuit is formed when RELAY is turned ON at COMPRESSOR startup.

To prevent rush current from running into the circuit when power supply is turned ON, RESISTOR are placed in sub circuit.

2.At normal operation

When AC runs into noise filter P.C. board, its external noise is eliminated in NOISE FILTER CIRCUIT.

After noise being eliminated from AC, it is rectified to DC by REACTOR and PFC. If the operating frequency becomes 25 Hz or more, DC voltage rises to 370 V.

DC voltage, to which has AC been rectified by process , is stabilized by SMOOTHING CAPACITOR and supplied to IPM.

The DC (Bus voltage), which has been stabilized in process , is converted to three-phase AC by IPM and supplied to

COMPRESSOR.

CURRENT TRANSFORMER, which is placed in the power supply circuit to COMPRESSOR, are used to measure the value of phase current and locate the polar direction of rotor with algorithm. PWM (Pulse width modulation) controls im- pressed voltage and frequency with those information.

3.Power factor improvement

Booster coil reactor and power factor controller rectify AC to DC and control its voltage.

In the motor drive system of sine wave control, power factor can be improved by reducing harmonics. PFC and reactor stabi- lize the voltage of DC supplied to inverter circuit and make its waveform smooth.

4.Power transistor module

IPM consists of the following components.

· Power Transistors (x6)	: Converts DC waveform to three-phase AC waveform and outputs it.
· Drive Circuit	: Drives transistors.
· Protection circuit	: Protects transistors from over current.

Since the above components are all integrated in IPM, IPM has a merit that can get the control circuit simplified and miniatur- ized.

5.Elimination of electrical noise

NOISE FILTER CIRCUIT, which is formed by *CMC COILS and capacitors placed on the noise filter P.C. board, eliminates electrical noise of AC power that is supplied to main power supply circuit. In short, common mode noise is absorbed in this circuit.

Moreover, normal mode noise is absorbed in another NOISE FILTER CIRCUIT which is formed by *NMC COILS and capaci- tors.

Both NOISE FILTER CIRCUIT exists for preventing the electrical noise generated in the inverter circuit from leaking out. *CMC COILS; Common mode choke coils

*NMC COILS; Normal mode choke coils

MSZ-FDNA, MUZ-FDNA - U, MUZ-FDNA, MUZ-ANA - U, MUY-ANA specifications

Mitsubishi Electronics has long been a leader in the HVAC (heating, ventilation, and air conditioning) industry, consistently delivering cutting-edge technology and innovative solutions. The MUZ-ANA, MUZ-ANA - U, MU-AWA, MUZ-FDNA, and MS-AWA models exemplify the company's commitment to efficiency, comfort, and advanced engineering.

The MUZ-ANA series is designed for residential and light commercial applications, offering powerful cooling and heating performance. One of the key features is its inverter technology, which allows for variable-speed operation. This means that the system can adjust the compressor speed according to the temperature demands, leading to significant energy savings and consistent comfort levels throughout the space. Additionally, the MUZ-ANA series operates quietly, ensuring a pleasant indoor environment.

The MUZ-ANA - U model takes energy efficiency a step further by incorporating a top-tier seasonal energy efficiency ratio (SEER) and heating seasonal performance factor (HSPF). This model is designed to maximize comfort while minimizing energy consumption, making it ideal for eco-conscious consumers.

The MU-AWA series is specifically tailored for larger spaces, making it suitable for commercial settings. Its robust design ensures reliability even under the most demanding conditions. Key features include advanced filtration systems that improve indoor air quality by trapping particulates and allergens, preferred by businesses aiming for a healthier environment.

The MUZ-FDNA model stands out for its sleek, compact design that fits seamlessly into various installation contexts, making it flexible for diverse architectural styles. It also features a built-in drain pan that helps in moisture removal, preventing mold growth and enhancing system longevity.

The MS-AWA model is particularly noteworthy for its smart connectivity options, allowing users to control their HVAC system via mobile devices. This feature empowers users to monitor and adjust temperatures remotely, providing added convenience and efficiency.

In summary, the Mitsubishi Electronics MUZ-ANA, MUZ-ANA - U, MU-AWA, MUZ-FDNA, and MS-AWA models feature state-of-the-art technology geared towards maximizing efficiency, comfort, and reliability. From inverter technology to smart connectivity, these units are designed to meet modern consumer demands while emphasizing sustainability and performance. With Mitsubishi Electronics, you can be assured of exceptional quality and technological advancement in HVAC solutions.