BTHS02 User Manual
6.2 Power On/Off the headset
《Power On》
Press and hold [] button for 4 seconds. While you see the LED flashes blue light for 4 times and hear two short high tones, release [] but- ton, then it will be powered on.
《Power Off》
Press and hold [] button for 4 seconds. While you see the LED flashes red light for 4 times and hear two low tones, release [] button, then it will be powered off.
6.3 Pairing
You are required to pair the headset with your mobile phone or other devices before using it.
1.The headset must be powered off before initiating pairing. To initiate pairing, press and hold [] button for 7 seconds until the blue and red indicators of headset are flashing alternatively. If you are wear- ing the headset during the pairing process, you will hear two short high tones when the headset is ready for pairing.
2.Initiate pairing process of your mobile phone. Refer to the manual of mobile phone for detail process.You will see a new
3.You will be asked to enter
*Note:
1.[1234] is the default
2.The red indicator of headset will turn off and the blue indicator will flash slowly after pairing completed successfully.
3.If the headset is not in pairing mode, your mobile phone won’t find the headset. Please set the headset on pairing mode before the mobile phone search for the headset.
4.If no pairing is possible for a period of time (approx. two minutes), the headset will automatically power off, and so the previous pairing (if any) is revoked.You may need to repeat steps 1 to 3 until pairing succeeds.
29