Mitsubishi Electronics MSZ-A24NA, MSY-A24NA Electromagnetic noise enters into TV sets or radios

Page 22

EElectromagnetic noise enters into TV sets or radios

No

Is the unit grounded?

Yes

Is the distance between the antennas and the indoor

unit within 9.91ft., or is the Yes distance between the

antennas and the outdoor unit within 9.91ft.?

No

Is the distance between the TV sets or radios and the

indoor unit within 3.28ft., or is Yes the distance between the TV

sets or radios and the outdoor unit within 9.91ft.?

No

Are the antennas damaged?

Is the coaxial cable damaged? Yes Is there any poor contact in

the antenna wiring?

No

Is the indoor/outdoor

Yes

connecting wire of the air conditioner and the wiring of the antennas close?

No

Ground the unit.

Extend the distance between the antennas and the indoor unit, and/or the antennas and the outdoor unit.

Extend the distance between the TV sets and/or radios and the indoor unit, or the TV sets or radios and the outdoor unit.

Replace or repair the antenna. Replace or repair the coaxial cable.

Extend the distance between the indoor/outdoor connecting wire of the air conditioner and the wiring of the antennas.

Even if all of the above conditions are fulfilled, the electromagnetic noise may enter, depending on the electric field strength or the installation condition (combination of specific conditions such as antennas or wiring).

Check the followings before asking for service. 1.Devices affected by the electromagnetic noise

TV sets, radios (FM/AM broadcast, shortwave)

2.Channel, frequency, broadcast station affected by the electromagnetic noise 3.Channel, frequency, broadcast station unaffected by the electromagnetic noise 4.Layout of ;

indoor/outdoor unit of the air conditioner, indoor/outdoor wiring, grounding wire, antennas, wiring from antennas, receiver

5.Electric field intensity of the broadcast station affected by the electromagnetic noise 6.Presence or absence of amplifier such as booster

7.Operation condition of air conditioner when the electromagnetic noise enters in

1)Turn OFF the power supply once, and then turn ON the power supply. In this situation, check for the electromagnetic noise.

2)Within 3 minutes after turning ON the power supply, press OPERATE/STOP (ON/OFF) button on the remote controller for power ON, and check for the electromagnetic noise.

3)After a short time (3 minutes later after turning ON), the outdoor unit starts running. During operation, check for the electromagnetic noise.

4)Press OPERATE/STOP (ON/OFF) button on the remote controller for power OFF, when the outdoor unit stops but the indoor/outdoor communication still runs on. In this situation, check for the electromagnetic noise.

22

Image 22
Contents Contents Revised EDITION-BTechnical Changes Part Names and Functions Specification Operating Range Outlet AIR Speed and Coverage RangeMSZ-A09NA MSY-A15NA MSZ-A12NA MSY-A17NA MSZ-A15NA MSZ-A17NA Outlines and DimensionsUnit inch MSZ-A24NA Wiring Diagram MSZ-A15NA MSY-A15NA Refrigerant System DiagramMSZ-A09NA MSZ-A12NA MSZ-A17NA MSY-A17NAHow to modify the remote controller P.C. board Service FunctionsTimer Short Mode P.C. Board Modification for Individual OperationAuto Restart Function TroubleshootingOperation Information for Multi System AIR Conditioner Troubleshooting procedureHow to replace batteries Outdoor Unit MXZ seriesFailure mode recall function Those figures show about MSZ-A09/12/15/17Indoor unit failure mode table Instruction of troubleshooting OperationTroubleshooting check table Indicates abnormalitiesTrouble criterion of main parts MXZ typeTroubleshooting flow Check of indoor fan motorCheck of remote controller and receiver P.C. board Indoor electronic control P.C.Board How to check mis-wiring and serial signal error Electromagnetic noise enters into TV sets or radios Indoor electronic control P.C. board Test point diagram and voltagePower monitor receiver P.C BoardMSZ-A24NA MSY-24NA Display P.C. board Receiver BoardRemoving the panel Photo Disassembly InstructionsMSZ-A09/12/15/17NA MSY-A15/17NA Operating Procedure Photos Photo Removing the electrical boxFan Removing the horizontal vane motor unit PhotoRemoving the indoor fan motor and the line flow Photo Motor bandRemoving the electronic control P.C. board, the receiver MSZ-A24NA MSY-A24NA Operating Procedure PhotosRemoving the front panel Board and the display P.C. boardRemoving the vane motor Removing the line flow fan and the indoor fan motorParts List Accessory and Remote ControllerBearing Mount Nozzle AssemblySwitch Holder Sleeve BearingAIR Cleaning Filter ANTI-ALLERGY Enzyme Filter Screw CAP Front Panel AssemblyCatch GrilleIndoor Unit Functional Parts and Electrical Parts AIR Cleaning Filter ANTI-ALLERGY Enzyme Filter Remote Controller KM07L Remote Controller KM07JE12 001 504 Qty/unit RoHSE12 751 509 E12 897 702RoHS Part name E12 A54 E12 A563PCS/ SET 4PCS/ SET11 G E12 A58 620 Indoor Heat Exchanger Remote Controller KM07M E12 A58 300 Indoor FAN Motor Assembly W1Remote Controller KM07K 11 G E12 408 303 Vane Motor HorizontalAIR Cleaning Filter ANTI-ALLERGY Enzyme Filter Microprocessor Control Indoor Unit Display SectionHeat Operation MSZ Cool OperationDRY Operation FAN d Operation MSYMode selection Auto Change Over ··· Auto Mode Operation MSZFuzzy control MSZ-A24 MSY-A24 Auto Vane OperationMSZ-A09/12/15/17 MSY-A15/17 Upward3 4 Swing 5 COOL/DRY HeatTimer Operation Program TimerMSZ-ANA MSY-ANA Changing temperature indication F/CEMERGENCY/TEST Operation Made in Japan
Related manuals
Manual 48 pages 59.2 Kb Manual 27 pages 7.37 Kb

MSY-A15NA, MSZ-A09NA, MSZ-A17NA, MSZ-A12NA, MSZ-A24NA specifications

Mitsubishi Electronics is a renowned name in the HVAC (heating, ventilation, and air conditioning) industry, known for innovative, efficient air conditioning solutions. The MSY-A17NA, MSY-A24NA, MSZ-A15NA, MSZ-A24NA, and MSZ-A12NA models exemplify this legacy, offering advanced features and cutting-edge technology. These models cater to various room sizes and requirements, providing comfortable and reliable climate control.

The MSY-A series, including the MSY-A17NA and MSY-A24NA, is designed for both cooling and heating. They feature inverter technology, which optimizes energy use by adjusting compressor speed based on demand, resulting in significant energy savings. The units come equipped with high-performance filters that capture dust and allergens, ensuring cleaner air.

Additionally, the MSY models incorporate a quiet operation mode, making them ideal for residential use. The user-friendly remote control allows for easy adjustments, while the programmable timer adds convenience for scheduling operation times to align with the user's lifestyle. Both models are built with durability in mind, featuring rust-resistant cabinets and high-quality components that extend the lifespan of the unit.

On the other hand, the MSZ-A models, which include the MSZ-A15NA, MSZ-A24NA, and MSZ-A12NA, are wall-mounted indoor units that complement the MSY outdoor models. With their sleek design, they blend seamlessly into any interior decor. The MSZ-A units also utilize inverter technology, enhancing energy efficiency and providing fast cooling and heating performance.

One notable feature of the MSZ-A series is the advanced air purification system, which goes beyond standard filtration. It includes technologies that neutralize odors and harmful gases, creating a healthier indoor environment. The models also come with a quiet operation mode, making them suitable for bedrooms and other quiet spaces.

All Mitsubishi MSY and MSZ models have been built with proactive environmental considerations, complying with high energy efficiency standards. They contribute to lower electricity bills and reduced carbon footprints. Furthermore, their compact design ensures easy installation in various settings without sacrificing performance.

In summary, Mitsubishi Electronics' MSY-A17NA, MSY-A24NA, MSZ-A15NA, MSZ-A24NA, and MSZ-A12NA models stand out in the competitive HVAC market. With features like inverter technology, advanced air purification, and user-friendly controls, these air conditioners deliver outstanding performance, comfort, and reliability while promoting energy efficiency and sustainability.