Electro-Voice NetMax N8000 owner manual System STATUS-LEDs, USB Interface

Page 11

Control Elements and Connections

clock master breaks down or is removed from the network, another N8000 will take over this function automatically.

SYSTEM STATUS-LEDs

These LEDs indicate device or system states. The READY- LED is on when the device has booted after switch-on and when it is ready for operation. An illuminated FAULT-LED

indicates an internal error in the N8000 or an error in the NetMax system. During the configuration of the N8000, it can be specified which errors should be displayed. If the FAULT display is on, the error should be

identified promptly. This can be done using the detailed diagnostics within the IRIS-Net PC software. The source of the fault has to be remedied immediately.

POWER-LED

This LED is permanently green when the N8000 is powered on. If the ON indication is not illuminated, even though the device is switched on, this device may not be connected to the power supply system or the primary fuse may be faulty.

USB Interface

A PC can be connected at the front panel via the USB interface. Thus, it is possible to connect the N8000 with a PC even it is already installed - i.e. when the Ethernet interface at the rear panel is perhaps no longer accessible.

Via the USB interface the network parameters of the N8000 can be edited and files containing the entire N8000 configuration can be transferred. You can find the necessary USB driver in the subdirectory

\Driver\USB in the IRIS-Net setup directory. Please see chapter Interface description for more information on technical details concerning the USB interface and the other interfaces of the N8000 which are described in the following section.

NetMax N8000 System Controller

11

Owner’s manual

 

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Page Network configuration Important Safety Instructions Onformity Description of the system IntroductionN8000 features Unpacking and warranty IRIS-Net Installation instructionBrowser Interface NETWORK-LEDs Signal / PEAK-LEDsControl Elements and Connections Front Faceplate USB Interface System STATUS-LEDsNetwork Module Slot Rear PanelAudio SLOTs RS-232 Interfaces Ethernet InterfaceControl Port Mains Connector and Power SwitchPreparations Mounting Installation of expansion cardsExpansion of the DSP performance of the system System expansion with analog/digital inputs or outputsSystem expansion with a network module Interface description Can Interface Assignment of can plug RS-232 Interface USB connectionControl Inputs Control Outputs Audio Interfaces Analog audio connecting cableDigital audio connecting cable Example Network configuration IntroductionNetwork configuration Click on Start Control Panel Network Connection ConfigurationDouble click on Internet Protocol TCP/IP NetMax N8000 System Controller NetMax N8000 System Controller Appendix Application Example Installation in a multi-purpose hallTroubleshootings Ethernet principles Appendix Check Network Configuration of PCSubnet mask IP addressesAutomatic/Manual Allocation of IP Addresses CAN-Bus Principles Appendix System Examples Performance Specifications IP Address Table General Description and Features Specifications/Technische DatenInterfaces Processing Block Diagram/BlockschaltbildDimensions/Abmessungen Page Page Page Subject to change withou prior notice V1.2

NetMax N8000 specifications

The Electro-Voice NetMax N8000 is a powerful digital signal processor (DSP) that has been designed to meet the demands of contemporary audio applications in both live sound and permanent installations. Offering a comprehensive suite of features, the N8000 provides high-quality audio processing, versatile routing, and a user-friendly interface, making it an ideal choice for audio professionals.

One of the standout features of the N8000 is its robust processing power. Equipped with multiple DSP cores, it can handle complex audio tasks simultaneously, ensuring that sound engineers have the flexibility they need to create intricate audio setups. The device supports up to 64 inputs and 64 outputs in configurations that can be easily customized through its flexible digital patching system. This scalability makes it suitable for a wide range of applications, from small venues to large concert halls.

Another key characteristic of the N8000 is its extensive network capabilities. The device supports Ethernet connectivity through the AVB (Audio Video Bridging) protocol, allowing for seamless integration with other AVB-enabled products. This feature allows for low-latency audio transmission and ensures high-quality signal integrity over longer distances, ideal for complex audio installations.

The N8000 also includes a comprehensive suite of advanced processing algorithms. These include delay, equalization, crossover, and dynamics processing, all of which can be easily adjusted via the intuitive software interface. The Electro-Voice NexSys software allows users to create and save presets, making it easy to recall specific settings for different events or venues.

In terms of build quality, the N8000 boasts a rugged chassis that is designed to withstand the rigors of touring and installation environments. Its rear panel features a variety of input and output options, including analog and digital connections, providing flexibility for different system designs.

Furthermore, the N8000 is designed with expansion in mind. Its modular architecture allows for additional cards to be added, enhancing the system's capability over time. This means that as audio technology evolves, users can keep their system up-to-date without the need for a complete replacement.

In summary, the Electro-Voice NetMax N8000 is a versatile and powerful DSP solution that combines advanced processing capabilities, robust connectivity, and a user-friendly interface. Its ability to adapt to various audio environments makes it an indispensable tool for sound engineers and installers looking to create the best possible audio experience.
Top Page Image Contents