Electro-Voice NetMax N8000 owner manual Preparations Mounting, Installation of expansion cards

Page 15

Preparations

3 Preparations

3.1 Mounting

1.Install the expansion cards.

If you have purchased expansion cards (AI-1, AO-1, CM-1, DSP-1, etc.) for your N8000 system controller, please install them. In this regard, please note the paragraph page 15 as well as the installation instructions in the manuals which are enclosed to the expansion cards.

2.Connect the power cable.

Please pay attention that the power switch of the N8000 (above the mains connector) is off.

3.Install the program IRIS-Net (Intelligent Remote & Integrated Supervision) on your PC. Please see the installation instruction for IRIS-Net in the file iris_readme.htm.

4.If you have installed expansion cards with inputs or outputs (AI-1, AO-1 or CM-1) in step 1, connect the corresponding devices now.

Please note the instruction manual both of the expansion cards and the used devices.

5.Connect the Ethernet interface of the N8000 with the PC via an appropriate Ethernet cable.

Please see the corresponding chapter Ethernet Interface on page 17.

6.If your application also utilizes Electro Voice P-series Remote Control amplifiers, connect the CAN interface of the N8000 with the amplifiers.

Please see the corresponding chapter CAN Interface on page 18.

7.Switch on the N8000 (via the power switch at the rear), the computer and any additional connected devices, if used.

In order to avoid any pops or thumps that may damage your speakers, please switch on the connected devices (if used) in the following order: audio signal sources - mixer and/or recorders - (power) amplifiers. These devices should be switched off in the reverse order.

8.Now start the IRIS-Net program on your PC.

You will find a program introduction in the online help of IRIS-Net and the corresponding

quick start guide in the menu: > .

3.2 Installation of expansion cards

The options for expanding the N8000 controller through the use of expansion cards are explained in this chapter. The N8000 can be equipped with expansion cards in different ways:

4 Slots (module slots) for the expansion of the system with analog/digital inputs (AI-1, MI-1, DI-1) or outputs (AO-1)

1 network module slot for the installation of a network module, e.g. CM-1 CobraNet™ Module

NetMax N8000 System Controller

15

Owner’s manual

 

Image 15
Contents Page Network configuration Important Safety Instructions Onformity Description of the system IntroductionN8000 features Unpacking and warranty IRIS-Net Installation instructionBrowser Interface Signal / PEAK-LEDs Control Elements and Connections Front FaceplateNETWORK-LEDs USB Interface System STATUS-LEDsRear Panel Audio SLOTsNetwork Module Slot RS-232 Interfaces Ethernet InterfaceControl Port Mains Connector and Power SwitchPreparations Mounting Installation of expansion cardsSystem expansion with analog/digital inputs or outputs System expansion with a network moduleExpansion of the DSP performance of the system Interface description Can Interface Assignment of can plug RS-232 Interface USB connectionControl Inputs Control Outputs Audio Interfaces Analog audio connecting cableDigital audio connecting cable Example Network configuration IntroductionNetwork configuration Click on Start Control Panel Network Connection ConfigurationDouble click on Internet Protocol TCP/IP NetMax N8000 System Controller NetMax N8000 System Controller Appendix Application Example Installation in a multi-purpose hallTroubleshootings Ethernet principles Appendix Check Network Configuration of PCSubnet mask IP addressesAutomatic/Manual Allocation of IP Addresses CAN-Bus Principles Appendix System Examples Performance Specifications IP Address Table General Description and Features Specifications/Technische DatenInterfaces Processing Block Diagram/BlockschaltbildDimensions/Abmessungen Page Page Page Subject to change withou prior notice V1.2

NetMax N8000 specifications

The Electro-Voice NetMax N8000 is a powerful digital signal processor (DSP) that has been designed to meet the demands of contemporary audio applications in both live sound and permanent installations. Offering a comprehensive suite of features, the N8000 provides high-quality audio processing, versatile routing, and a user-friendly interface, making it an ideal choice for audio professionals.

One of the standout features of the N8000 is its robust processing power. Equipped with multiple DSP cores, it can handle complex audio tasks simultaneously, ensuring that sound engineers have the flexibility they need to create intricate audio setups. The device supports up to 64 inputs and 64 outputs in configurations that can be easily customized through its flexible digital patching system. This scalability makes it suitable for a wide range of applications, from small venues to large concert halls.

Another key characteristic of the N8000 is its extensive network capabilities. The device supports Ethernet connectivity through the AVB (Audio Video Bridging) protocol, allowing for seamless integration with other AVB-enabled products. This feature allows for low-latency audio transmission and ensures high-quality signal integrity over longer distances, ideal for complex audio installations.

The N8000 also includes a comprehensive suite of advanced processing algorithms. These include delay, equalization, crossover, and dynamics processing, all of which can be easily adjusted via the intuitive software interface. The Electro-Voice NexSys software allows users to create and save presets, making it easy to recall specific settings for different events or venues.

In terms of build quality, the N8000 boasts a rugged chassis that is designed to withstand the rigors of touring and installation environments. Its rear panel features a variety of input and output options, including analog and digital connections, providing flexibility for different system designs.

Furthermore, the N8000 is designed with expansion in mind. Its modular architecture allows for additional cards to be added, enhancing the system's capability over time. This means that as audio technology evolves, users can keep their system up-to-date without the need for a complete replacement.

In summary, the Electro-Voice NetMax N8000 is a versatile and powerful DSP solution that combines advanced processing capabilities, robust connectivity, and a user-friendly interface. Its ability to adapt to various audio environments makes it an indispensable tool for sound engineers and installers looking to create the best possible audio experience.