Thermador VTN420B Cabinet Installation Figure, Integral Ventilator Installation

Page 14

Cabinet Installation: (Figure 5)

Note: distances on page 10, Table 3.

1.Find the centerline of the cabinet bottom. Draw a line along this centerline from rear to front of the cabinet.

2.Draw two lines, one at a K distance from the wall, the other one at a Z distance from the previous line.

Mark 4 points , two along each line at a distance of half W from the center line, to determine the screw locations.

3.Fit 4 screws on cabinet bottom do not tighten completely but leave a space of about 1/2” from cabinet bottom surface and head screws.

4.Run 8” Duct, long enough to reach the transition once the hood has been installed plus 1 1/2” inch for connect ductwork.

Fix Duct to transition with screws and seal with tape.

5.If mounted, remove the grease filter.

6.Remove 1 of 2 knockouts and install 1/2” conduit connector in j-box.

7.Hang the hood on screws through side slots provided on hood top.

Tighten the four screws.

If possible fix the hood on the wall at 4 additional point (2 on upper side, 2 on lower side).

INTEGRAL VENTILATOR INSTALLATION

(Models VTN420B or VTN620B) (see figure 9)

The Integral ventilator can be mounted to discharge air as shown on figure A and B at page 9.

It must be fixed through the slots of the ventilator and pins with nuts of the hood.

Tighten all four nuts.

Integral ventilator fixing point

Motor

support bracket Motor connector

Figure 9

Page 14

Image 14
Contents Read and Save These Instructions Important Safety Instructions FIRE, USE only Metal Duct WorkEvacuateandcallthefire Department LES Instructions DE Sécurité Importantes Seulement si Parts Included with your Hood Before Installing Hood Appliance Installation Cabinet or Soffit PreparationTypical Installation DuctingTab 2 7 1/16 Wall Mount Installation HST series Hood only see Figure 67/8Page Models VTN420B or VTN620B see figure Cabinet Installation FigureIntegral Ventilator Installation Wiring the Hood with an IntegralVentilator Remove the j-box cover as shown in FigureWiring the Hood with a Remote Ventilator Fixing Screws number depends on hood size

VTN420B specifications

The Thermador VTN420B is a state-of-the-art ventilation hood designed to enhance both the aesthetic appeal and functionality of modern kitchens. This appliance is a part of Thermador’s professional series, revered for its superior craftsmanship and innovative technologies.

One of the standout features of the VTN420B is its powerful ventilation system. Equipped with a robust 600 CFM motor, it effectively removes smoke, odors, and steam from your cooking space, ensuring that the air remains fresh and clean. The hood offers multiple fan speeds, allowing users to customize the level of ventilation depending on the intensity of cooking.

In terms of design, the VTN420B showcases a sleek and professional appearance, made from high-quality stainless steel. This not only provides durability but also adds a contemporary touch to any kitchen decor. The hood features a low-profile design, making it an excellent choice for kitchens with lower ceilings, while still maintaining the necessary power and efficiency.

Another notable characteristic is its innovative WhisperQuiet technology. This ensures that the operation of the ventilation hood remains quiet, allowing for a more enjoyable cooking experience without the distraction of loud fans. This technology is particularly beneficial in open-concept spaces, where noise can easily travel from the kitchen to other areas.

The VTN420B also includes high-quality baffle filters that are dishwasher-safe, ensuring easy maintenance. These filters effectively capture grease and other contaminants, ensuring optimal performance of the ventilation system while making clean-up straightforward.

In addition to its functional features, the Thermador VTN420B is equipped with advanced lighting options. The integrated LED lights illuminate the cooktop area, providing excellent visibility while cooking. These energy-efficient lights enhance safety while also being kind to your energy bill.

Lastly, installation of the VTN420B is versatile; it can be set up for either ducted or ductless operation depending on the kitchen layout. This flexibility makes it suitable for various home configurations, allowing homeowners to achieve optimal performance tailored to their specific needs.

In conclusion, the Thermador VTN420B stands out as a premier choice for any culinary enthusiast. Its advanced technologies, user-friendly features, and stylish design make it not just a functional appliance, but also an elegant addition to the kitchen environment. Whether you are a professional chef or a home cooking aficionado, this ventilation hood will elevate your cooking experience to new heights.