Fisher & Paykel HS60CSW2 Cleaning and maintenance, General maintenance, Aluminium filter

Page 9

Cleaning and maintenance

Caution!

Never use abrasive or oil based liquid cleaners.

General maintenance

The manufacturer is not liable for any damage caused by not following these instructions.

The rangehood should be cleaned regularly using warm water with soap or mild liquid detergents. This ensures that no build-up of grease occurs as these deposits are corrosive. Do not use abrasives or harsh detergents/cleaning fluids.

Note: in areas of high humidity and coastal environments cleaning should be carried out frequently.

7

Aluminium filter

The grease filter must be periodically cleaned (at least every two months).

Remove the grease filter and wash either by hand using hot soapy water or place in the dishwasher using mild detergent. A badly smoked filter may be cleaned with “cookware cleaners”.

Note: some discolouration of the frame may occur.

When installing or replacing a filter, remove the protective plastic covering from the filter.

Charcoal filter

Charcoal filters are designed to remove grease and odours from cooking vapours, prior to the cleansed air re-entering the kitchen (when the rangehood is in recirculating mode). Charcoal filters are disposable items and it is recommended that these should be replaced every three to six months depending on use.

Note:

Fully saturated charcoal filters can become a barrier to air movement, impeding the rangehood’s performance.

In the event of fire, fully grease laden filters could be flammable and therefore regular replacement is recommended.

In ducted installations, conventional aluminium filters are recommended.

For replacement charcoal filters, ducting accessories, spare parts and service, please contact your local supplier or Fisher & Paykel Customer Care Centre.

Light bulb replacement (230 Volt / 50 Watt light bulb)

1To replace a light bulb, first disconnect rangehood from power supply.

2Apply finger pressure to the face of the lamp cover and twist one quarter turn anti-clockwise, the lamp cover will now be free to drop out.

3Remove the faulty bulb and fit replacement bulb into the lamp holder.

4Refit the lamp cover, applying finger pressure and twist one quarter turn clockwise.

Image 9
Contents Installation instructions and User guide Contents Electrical Shock Hazard Safety and warningsContents of packaging Installation instructionsAccessories Typical equipment requiredDucting options Height of rangehoodRecirculated installation Preparing the rangehood for installationDucted installation Mounting the rangehoodFixing holes Mounting to cabinetry sidesGetting started quickly Control panel featuresGeneral maintenance Cleaning and maintenanceAluminium filter Charcoal filterThis Warranty does not cover Manufacturer’s WarrantyFisher & Paykel undertakes to Please keep this User Guide in a safe placeCustomer Care Before you call for service or assistance…New Zealand if you need assistance Australia if you need assistanceNZ AU