Toshiba HV6FS-MLD instruction manual Receiving and Unpacking, Acceptance Inspection

Page 14

Page 10

RECEIVING, INSPECTION AND HANDLING

RECEIVING AND UNPACKING

The circuit breaker units are subjected to factory production testing prior to being packed and shipped.

ACCEPTANCE INSPECTION

Confirm that the circuit breaker and cell units are complete, correct as specified and undamaged from shipment and handling.

Upon receipt of the equipment, do the following:

1)Make an immediate inspection for damage that might have occurred during shipment. If damage is discovered, it should be noted with the carrier prior to accepting the shipment, if possible.

2)Carefully unpack the equipment sufficiently to check for missing parts or concealed damage.

3)Check for the presence of accessories that are shipped with the circuit breaker and cell:

-Charging Handle (Fig. 5)

-B9 Grease (Fig. 6)

-Control Wire Harness (Fig. 7)

3) Keep the circuit breaker and cell upright.

CAUTION

Never lay the circuit

 

breaker or cell on its side

 

or upside down. This may

 

cause damage.

4)File a claim with the carrier for any damaged or missing items and immediately notify the nearest Toshiba representative.

Fig. 5 Charging Handle

Fig. 6 B9 Grease

WARNING

Do not install or energize equipment that has been damaged. Damaged equipment can fail during operation, resulting in fire and explosion.

Fig. 7 Control Wire Harness

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Installation Operation Maintenance Page Toshiba International Corporation Page Important Messages SafetyRead Safety Signs Qualified person must Safety CodesQualified Operators only Safety Table of Contents Storage SpecificationsWarranty and Limitation of Liability Introduction General Description Components LegendSafety Devices Interlock Release LeverIndicators and Controls Fig Indicators and ControlsReceiving and Unpacking Acceptance InspectionRECEIVING, Inspection and Handling Handling and MovingInstallation Rating VerificationInstallation Main Circuit Cable ConnectionsGround Connections Location of Ground TerminalControl Circuit Connections Control Circuit PlugPlacing the Circuit Breaker Cell Apply B9 Grease to Stab FingersEquipment and possible Placing the Circuit Breaker in the Cell cont’dTo avoid damage to Holding pin unlessElectrical shock hazard GeneralElectrical Checks Do not touch energizedOperation To Move the Circuit Breaker to the Connected PositionTo Move the Circuit Breaker to the Disconnected Position Disconnect Control Circuit PlugManual Closing PRE-ENERGIZATION CheckManual Operation Undervoltage Trip Manual OpeningElectrical Operation Electrical Operation Flow Chart Maintenance Symbol DescriptionServicing Equipment Maintenance ProgramMaintenance Record Only qualified personnel should attemptRecommended Inspection and Maintenance Types Tightening TorquesCheck Points for Periodic Inspection Check Points for Inspection cont’d Vacuum Check PrecautionsTest Procedure Test EquipmentCriteria VoltageDisposal DisposalInspection During Storage StorageStorage Specifications 34 Warranty and Limitation of Liability

HV6FS-MLD specifications

The Toshiba HV6FS-MLD is a high-performance semiconductor designed for various applications such as inverters, power supplies, and automotive systems. This device is particularly noted for its efficiency and reliability in managing high voltage levels, making it an essential component in modern electronic systems.

One of the standout features of the HV6FS-MLD is its superior power handling capacity. Designed to accommodate high voltage operations, this device ensures minimal energy loss during the conversion and regulation processes. The incorporation of advanced materials contributes to its ability to withstand high temperatures without compromising performance, making it suitable for harsh environments.

Another key technology integrated into the HV6FS-MLD is Toshiba’s Isolated Gate Drive technology. This technology enhances the safety and stability of the device by preventing unwanted current flow, which is particularly crucial in high-voltage applications. The isolated gate drive also allows for better control and reliability when interfacing with different circuit topologies.

The HV6FS-MLD is characterized by its compact design, which enables it to fit into space-constrained environments without sacrificing power capabilities. This compactness does not impair its performance; rather, it ensures that devices are not only efficient but also adaptable to various designs. Furthermore, the device is equipped with integrated protection features, including over-voltage protection and thermal shutdown mechanisms, which safeguard both the HV6FS-MLD itself and the larger system in which it operates.

Moreover, the HV6FS-MLD supports a wide operating temperature range, making it versatile for applications ranging from consumer electronics to industrial systems. This adaptability is crucial as manufacturers increasingly demand components that can perform reliably across varying conditions.

Toshiba's commitment to quality and innovation is reflected in the HV6FS-MLD’s robust performance and longevity. The component’s reliability is further enhanced by rigorous testing protocols that ensure it meets stringent industry standards. As electronic systems continue to evolve, the HV6FS-MLD stands out as a dependable solution for powering the next generation of devices.

In conclusion, the Toshiba HV6FS-MLD is an advanced semiconductor solution that embodies efficiency, reliability, and versatility, making it an invaluable asset in the design and implementation of modern electronic systems.
Top Page Image Contents