Toshiba HV6FS-MLD instruction manual Qualified Operators only, Qualified person must, Safety Codes

Page 6

Page 2

SAFETY

QUALIFIED OPERATORS ONLY

Only qualified persons are to install, operate, or service this equipment according to all applicable codes and established safety practices.

A qualified person must:

1)Carefully read the entire instruction manual.

2)Be skilled in the installation, construction or operation of the equipment and aware of the hazards involved.

3)Be trained and authorized to safely energize, de-energize, clear, ground, lockout and tag circuits in accordance with established safety practices.

4)Be trained and authorized to perform the service, maintenance or repair of this equipment.

5)Be trained in the proper care and use of protective equipment such as rubber gloves, hard hat, safety glasses, face shield, flash clothing, etc. in accordance with established practices.

6)Be trained in rendering first aid.

SAFETY CODES

Toshiba HV6FS vacuum circuit breakers are designed and built in accordance with JIS

C4603-1990 and JEC-2300-1985. Installations must comply with all applicable state and local codes, adhere to all applicable National Electric Code (NFPA 70) standards and instructions provided in this manual.

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Installation Operation Maintenance Page Toshiba International Corporation Page Safety Read Safety SignsImportant Messages Safety Codes Qualified Operators onlyQualified person must Safety Table of Contents Specifications Warranty and Limitation of LiabilityStorage Introduction General Description Components LegendSafety Devices Interlock Release LeverIndicators and Controls Fig Indicators and ControlsReceiving and Unpacking Acceptance InspectionRECEIVING, Inspection and Handling Handling and MovingInstallation Rating VerificationInstallation Main Circuit Cable ConnectionsGround Connections Location of Ground TerminalControl Circuit Connections Control Circuit PlugPlacing the Circuit Breaker Cell Apply B9 Grease to Stab FingersEquipment and possible Placing the Circuit Breaker in the Cell cont’dTo avoid damage to Holding pin unlessElectrical shock hazard GeneralElectrical Checks Do not touch energizedOperation To Move the Circuit Breaker to the Connected PositionTo Move the Circuit Breaker to the Disconnected Position Disconnect Control Circuit PlugPRE-ENERGIZATION Check Manual OperationManual Closing Manual Opening Electrical OperationUndervoltage Trip Electrical Operation Flow Chart Maintenance Symbol DescriptionServicing Equipment Maintenance ProgramMaintenance Record Only qualified personnel should attemptRecommended Inspection and Maintenance Types Tightening TorquesCheck Points for Periodic Inspection Check Points for Inspection cont’d Vacuum Check PrecautionsTest Procedure Test EquipmentCriteria VoltageDisposal DisposalStorage StorageInspection During Storage Specifications 34 Warranty and Limitation of Liability

HV6FS-MLD specifications

The Toshiba HV6FS-MLD is a high-performance semiconductor designed for various applications such as inverters, power supplies, and automotive systems. This device is particularly noted for its efficiency and reliability in managing high voltage levels, making it an essential component in modern electronic systems.

One of the standout features of the HV6FS-MLD is its superior power handling capacity. Designed to accommodate high voltage operations, this device ensures minimal energy loss during the conversion and regulation processes. The incorporation of advanced materials contributes to its ability to withstand high temperatures without compromising performance, making it suitable for harsh environments.

Another key technology integrated into the HV6FS-MLD is Toshiba’s Isolated Gate Drive technology. This technology enhances the safety and stability of the device by preventing unwanted current flow, which is particularly crucial in high-voltage applications. The isolated gate drive also allows for better control and reliability when interfacing with different circuit topologies.

The HV6FS-MLD is characterized by its compact design, which enables it to fit into space-constrained environments without sacrificing power capabilities. This compactness does not impair its performance; rather, it ensures that devices are not only efficient but also adaptable to various designs. Furthermore, the device is equipped with integrated protection features, including over-voltage protection and thermal shutdown mechanisms, which safeguard both the HV6FS-MLD itself and the larger system in which it operates.

Moreover, the HV6FS-MLD supports a wide operating temperature range, making it versatile for applications ranging from consumer electronics to industrial systems. This adaptability is crucial as manufacturers increasingly demand components that can perform reliably across varying conditions.

Toshiba's commitment to quality and innovation is reflected in the HV6FS-MLD’s robust performance and longevity. The component’s reliability is further enhanced by rigorous testing protocols that ensure it meets stringent industry standards. As electronic systems continue to evolve, the HV6FS-MLD stands out as a dependable solution for powering the next generation of devices.

In conclusion, the Toshiba HV6FS-MLD is an advanced semiconductor solution that embodies efficiency, reliability, and versatility, making it an invaluable asset in the design and implementation of modern electronic systems.
Top Page Image Contents