Whirlpool W10029770A Installation Requirements, Tools and Parts, Location Requirements

Page 4

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Tools needed

Level

Drill with 1¼” (3 cm), ³⁄₈” (9.5 mm), ⁷⁄₆₄” (2.75 mm) and ¹⁄₈” (3 mm) drill bits

Pencil

Wire stripper or utility knife

Tape measure or ruler

Pliers

Caulking gun and weatherproof caulking compound

Vent clamps

Jigsaw or keyhole saw

Flat-blade screwdriver

Metal snips

Phillips screwdriver

Parts needed

¹⁄₂" conduit

Two ½" (12.7 mm) UL listed or CSA approved strain reliefs

3 UL listed wire connectors

1 wall or roof cap

Metal vent system

Charcoal Filter Kit Part Number 4396848 for non-vented (recirculating) installations only. See “Assistance or Service” section to order.

Parts supplied

Remove parts from packages. Check that all parts are included.

Hood canopy assembly with ventilator and light bulbs installed

Deflector for non-vented (recirculating) installations

Plastic transition with back draft dampers installed

Literature package

Filter(s) - depending on model and size

2 mounting hooks

Vent cover support bracket

Mounting template

2-piece vent cover

4 - 4 x 8 mm screws

10 - 3.5 x 9.5 mm screws

4 - 5 x 35 mm screws

2 - 2.9 x 9.5 mm screws

2 - 6 x 70 mm

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.

Have a qualified technician install the range hood. It is the installer's responsibility to comply with installation clearances specified on the model/serial rating plate. The model/serial rating plate is located behind the left filter on the rear wall of the vent hood.

Canopy hood location should be away from strong draft areas, such as windows, doors and strong heating vents.

Cabinet opening dimensions that are shown must be used. Given dimensions provide minimum clearance.

Grounded electrical outlet is required. See “Electrical Requirements” section.

The canopy hood is factory set for venting through the roof or wall. For non-vented (recirculating) Installation see “Non-vented (recirculating) Installations” in “Prepare Location” section. Charcoal Filter Kit Part Number 4393848 is available from your dealer or an authorized parts distributor.

All openings in ceiling and wall where canopy hood will be installed must be sealed.

For Mobile Home Installations

The installation of this range hood must conform to the Manufactured Home Construction Safety Standards, Title 24 CFR, Part 328 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD, Part 280) or when such standard is not applicable, the standard for Manufactured Home Installation 1982 (Manufactured Home Sites, Communities and Setups) ANSI A225.1/NFPA 501A*, or latest edition, or with local codes.

Product Dimensions

11 ⁵⁄₁₆"

10 ¹³⁄₁₆"

(28.7 cm)

(27.5 cm)

 

21 ¹⁄₄"

 

(54.0 cm)

33 ¹⁄₁₆"

min.

(84.0 cm)

33 ¹⁄₁₆"

 

(84.0 cm)

 

max.

16⁵⁄₈"

(42.3 cm)

 

 

3 ¹⁵⁄₁₆"

 

 

(10.0 cm)

 

 

2 ³/₈"

14³⁄₁₆"

cm)(36.0

(6.0 cm)

⁷⁄₈"

 

 

(2.3 cm)

 

 

135

35 ³⁄₈"

 

3 ¹⁵⁄₁₆"

(89.8 cm)

 

(10.0 cm)

4

Image 4
Contents Hotte DE Cuisinière Pour Range Hood Safety Table of ContentsImportant Safety Instructions Tools and Parts Installation RequirementsLocation Requirements Venting Requirements For non-vented recirculating installations Electrical RequirementsCalculating Vent System Length Example vent systemInstallation Instructions Prepare LocationNon-vented recirculating Installation Vent Cover Bracket InstallationVent Cover Bracket Assembly and Installation Make Electrical Connection Install Range HoodConnect Vent System Complete Installation Install FiltersRange Hood USE Check OperationCleaning and Maintenance Range Hood CareWiring Diagram U.S.A Assistance or ServiceCanada Whirlpool Corporation Major Appliance Warranty CallSécurité DE LA Hotte DE Cuisinière Votre sécurité et celle des autres est très importanteConservez CES Instructions Exigences d’emplacement Exigences D’INSTALLATIONOutillage et pièces Dimensions du produit Dimensions à respecter lors de linstallationExigences concernant lévacuation Pour un fonctionnement efficace et silencieuxInstallations pour régions à climat froid Installation sans décharge à lextérieur recyclageRenouvellement de l’air Méthodes dévacuationPréparation de lemplacement Instructions D’INSTALLATIONSpécifications électriques Installation de la bride de cache-conduit Assemblage et installation de la bride de cache-conduitInstallation de la hotte Installation du conduit dévacuationAchever l’installation Raccordement électriqueInstallation des filtres CuisinièreFonctionnement Contrôle du fonctionnementRemplacement du filtre à graisse métallique Installation des filtres à charbonRemplacement des filtres à graisse métalliques Remplacement des filtres à charbonSchéma DE Câblage Transfor MateurAssistance OU Service Liste d’accessoires Ensemble Filtre à charbonSi vous avez besoin de pièces de rechange Pour plus d’assistanceGarantie DES Gros Appareils Ménagers Whirlpool Corporation W10018030

W10029770A specifications

The Whirlpool W10029770A is a sophisticated appliance designed to enhance kitchen efficiency, ensuring that food preparation and cooking processes are seamless and effective. This innovative product stands out for its combination of features, technologies, and characteristics that cater to the needs of modern households.

At the heart of the Whirlpool W10029770A is its powerful performance capability. The unit is engineered with a high-efficiency motor that ensures consistent operation and longevity. Whether you're blending smoothies, mixing batters, or whipping cream, this appliance provides the desired results with precision.

One of the standout features of the W10029770A is its versatile functionality. This appliance offers multiple speed settings, allowing users to adjust the power according to their specific needs. With options ranging from pulse to high-speed blending, it can handle a diverse range of tasks. The inclusion of specialized attachments further enhances its versatility, making it ideal for everything from food processing to mixing.

The design of the Whirlpool W10029770A is another noteworthy characteristic. Its sleek, modern aesthetic complements a variety of kitchen styles, while its compact size ensures it can easily fit in any kitchen space without taking up excessive counter space. The intuitive controls are user-friendly, making it accessible for all family members to operate with ease.

Furthermore, the Whirlpool W10029770A incorporates advanced technologies that enhance its performance. The appliance features innovative blade designs that optimize blending and mixing efficiency, reducing preparation time while maximizing results. Additionally, the materials used in construction are durable and easy to clean, ensuring hygienic use while maintaining the appliance's longevity.

Safety is also a priority in the design of the W10029770A. The appliance includes features such as a secure locking lid and non-slip base, providing peace of mind during operation. These elements contribute to a safe kitchen environment, allowing users to focus on their culinary creations without unnecessary worry.

In conclusion, the Whirlpool W10029770A is a multifunctional appliance that combines high performance, versatility, and modern design. Its range of features and advanced technologies make it a valuable addition to any kitchen, catering to both novice cooks and seasoned chefs alike. Whether you're preparing a quick meal or experimenting with new recipes, the Whirlpool W10029770A is equipped to meet your culinary demands with excellence.