Installation Instructions, Prepare Location

INSTALLATION INSTRUCTIONS

Prepare Location

■	It is recommended that the vent system be installed before
	hood is installed.
■	Do not cut a joist or stud unless absolutely necessary. If a

7.Tape template in place, aligning the template centerline and bottom of template with hood bottom line and with the centerline marked on the wall.

joist or stud must be cut, then a supporting frame must be

constructed.

■ Before making cutouts, make sure there is proper clearance

within the ceiling or wall for exhaust vent.

■ Check your ceiling height and the hood height maximum

before you select your hood.

WARNING

Excessive Weight Hazard

Use two or more people to move and install range. Failure to do so can result in back or other injury.

1.If possible, disconnect and move freestanding or slide-in range from cabinet opening to provide easier access to rear wall. Otherwise, put a thick, protective covering over countertop, cooktop or range to protect from damage or dirt.

2.Determine which venting method to use: roof, wall, or non- vented.

3.Select a flat surface for assembling the range hood. Cover that surface with a protective covering.

WARNING

Excessive Weight Hazard

Use two or more people to move and install range hood.

Failure to do so can result in back or other injury.

4.Using 2 or more people, lift range hood onto protective covering.

5.Determine and mark the centerline on the wall where the canopy hood will be installed.

6.Select a mounting height between a minimum of

30" (76.2 cm) and a suggested maximum of 36" (91.4 cm), above the range to the bottom of the hood and mark reference line on the wall.

NOTE: For installation locations with reduced ceilings heights, the vent hood may be installed using the upper vent cover for both vented and non-vented (recirculating) installations.

A.Centerline

B.Mounting hook location

C.Fastener locations

D.Mounting height reference

8.Mark centers of the 6 fastener locations through the template to the wall.

IMPORTANT: All screws must be installed into wood. Remove the template.

9.Drill ⁷⁄₆₄" (2.75 mm) pilot holes at all locations where screws are being installed into wood.

10.Determine and make all necessary cuts in the wall for the vent system. Install the vent system before installing the hood. See “Venting Requirements” section.

11.Determine the required height for the ½" conduit and drill a 1¼" (3.2 cm) hole at this location.

12.Run wire through the ½" conduit according to the National Electrical Code or CSA Standards and local codes and ordinances. There must be enough ½" conduit and wires from the fused disconnect (or circuit breaker) box to make the connection in the hood’s electrical terminal box.

13.Use caulk to seal all openings.

NOTE: Do not reconnect power until installation is complete.

14.Attach two mounting hooks to the wall at location marked on the template.

A B

A. Mounting hooks

B. Centerline on wall

W10029770A specifications

The Whirlpool W10029770A is a sophisticated appliance designed to enhance kitchen efficiency, ensuring that food preparation and cooking processes are seamless and effective. This innovative product stands out for its combination of features, technologies, and characteristics that cater to the needs of modern households.

At the heart of the Whirlpool W10029770A is its powerful performance capability. The unit is engineered with a high-efficiency motor that ensures consistent operation and longevity. Whether you're blending smoothies, mixing batters, or whipping cream, this appliance provides the desired results with precision.

One of the standout features of the W10029770A is its versatile functionality. This appliance offers multiple speed settings, allowing users to adjust the power according to their specific needs. With options ranging from pulse to high-speed blending, it can handle a diverse range of tasks. The inclusion of specialized attachments further enhances its versatility, making it ideal for everything from food processing to mixing.

The design of the Whirlpool W10029770A is another noteworthy characteristic. Its sleek, modern aesthetic complements a variety of kitchen styles, while its compact size ensures it can easily fit in any kitchen space without taking up excessive counter space. The intuitive controls are user-friendly, making it accessible for all family members to operate with ease.

Furthermore, the Whirlpool W10029770A incorporates advanced technologies that enhance its performance. The appliance features innovative blade designs that optimize blending and mixing efficiency, reducing preparation time while maximizing results. Additionally, the materials used in construction are durable and easy to clean, ensuring hygienic use while maintaining the appliance's longevity.

Safety is also a priority in the design of the W10029770A. The appliance includes features such as a secure locking lid and non-slip base, providing peace of mind during operation. These elements contribute to a safe kitchen environment, allowing users to focus on their culinary creations without unnecessary worry.

In conclusion, the Whirlpool W10029770A is a multifunctional appliance that combines high performance, versatility, and modern design. Its range of features and advanced technologies make it a valuable addition to any kitchen, catering to both novice cooks and seasoned chefs alike. Whether you're preparing a quick meal or experimenting with new recipes, the Whirlpool W10029770A is equipped to meet your culinary demands with excellence.