Hotpoint HTV10 manual Cleaning, How to replace the light

Page 10

Caring for your Cooker Hood

Cleaning:

The exterior of the Cooker Hood should be cleaned regularly to keep it looking like new. Wipe over with a soft cloth, wrung out in warm water and dry with a clean soft cloth. Wear protective gloves.

You can use mild non-abrasive cleaners but always read the manufacturer’s instructions first. Always test their suitability on a small area of the Cooker Hood not noticeable in normal use.

NOTE: DO NOT use scouring pads or abrasive cleaners as they may scratch the surface.

How to replace the light:

Should the light fail to work, switch ‘Off’ the mains supply to the Hood.

Open the grille and check the bulb is screwed securely into the bulb holder then switch ‘On’ the mains supply.

If the light fails to work do not worry, it will not affect the working of your hood. Obtain a replacement 40 watt (E14) bulb. Switch ‘Off’ the mains supply. Unscrew the old bulb anti- clockwise to remove and replace with the new bulb turning clockwise until secure. Refit the filter grille and switch back ‘On’ at the mains.

NOTE: When changing the bulb, an identical replacement must be fitted to ensure the safe operation of the hood.

Fig.14

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Cooker Hood Your new Cooker Hood Electrical RequirementsContents Retention of the Instruction BookGet to know your Cooker Hood DimensionsUnpacking Installation for Recirculation Installing your Cooker HoodInstallation Extraction RecirculationRear Extraction Top ExtractionDucting Fixing to the cabinet Wall Vent KitMounting Height Fixing to the wallOperating your Cooker Hood Don’tFilters and their replacement Caring for your Cooker HoodCleaning How to replace the lightTroubleshooting Key Contacts For further product information 08701 50 60
Top Page Image Contents