Magic VAC Loses Vacuum After Being Sealed

MAGIC VAC™ Vantage

Commercial Quality Vacuum Sealer

MAGIC VAC™ LOSES VACUUM AFTER BEING SEALED

■Leaks along the seal can be caused by wrinkles, crumbs, grease or liquids. Reopen bag, wipe the top inside of the bag and smooth it out along the sealing strip before resealing.

■The release of natural gases or fermentation from foods (such as fresh fruits and vegetables) may occur. Open bag if you think food has begun to spoil and discard food. Lack of refrigeration or fluctu- ating temperatures in the refrigerator can cause food to spoil. If food is not spoiled, consume food immediately.

■Check the bag for a puncture or hole which may have released the vacuum. Cushion sharp edges in the contents of the bag with paper towels.

MAGIC VAC™ NOT SEALING BAG PROPERLY

■Should Sealing Bar overheat and melt the bag, it may be necessary to lift the Lid and allow the Seal Bar to cool for a few minutes.

■Built-in safety shut-off may shut the machine off if it becomes overheated. Allow Magic Vac™ to cool down for 15 minutes and try again.

MAGIC VAC™ DOES NOT DRAW VACUUM IN CONTAINERS

■Ensure the Accessory Hose is secured on both ends.

■Leave adequate head space at the top of the jar or canister.

■Make sure arrow on canister lid knob points to Vacuum setting.

■Use the correct size Jar Attachment. Large size is used with wide-mouth canning jars. Small size is used with narrow mouth jars.

■Check Jar Attachment to make sure it is not worn or damaged.

■If liquids bubble up when vacuum packing, remember they must be cooled prior to vacuum packing. Cool liquids rapidly under refrigeration and not at room temperature.

MAGIC VAC™ CANISTERS AND CONTAINERS LOSE THEIR VACUUM

■Make sure arrow on the knob of canister lid and universal lid is turned to the closed position after vacuuming.

■Examine jar or canister rims and lids for defects in the sealing areas. Clean rim and lid with damp cloth and vacuum again.

■Check that canister lid and universal lid gasket are in place and are not damaged.

■Check that the O-rings under canister lid and universal lid are in place and completely seated.

■Canning jar lids must be perfect and not bent.

■Canning jar lid may need to be replaced with a new one.

1940 specifications

Deni 1940 is a noteworthy model from the Italian automotive manufacturer, Deni, which was known for producing distinctive vehicles during a time when the automobile industry was rapidly evolving. The Deni 1940 model stands out due to its unique blend of style, functionality, and technological innovations that were reflective of its era.

One of the primary features of the Deni 1940 is its elegant design, which showcases the art deco influence prevalent during that period. The vehicle boasts sleek lines, a streamlined body, and chrome detailing that enhance its visual appeal. Buyers of the Deni 1940 were often drawn to these aesthetic qualities, as the car was seen as a symbol of sophistication and modernity.

Under the hood, the Deni 1940 is powered by a robust inline-six engine, offering a balance of performance and efficiency. This engine was designed to provide ample power for its size, with smooth acceleration that was quite competitive for its time. Coupled with a manual transmission, the driving experience was engaging, allowing drivers to appreciate the car's mechanical capabilities.

In terms of technology, the Deni 1940 incorporated several advancements that set it apart from its competitors. It featured an innovative electrical system that included a 6-volt battery and improved lighting, enhancing visibility during night-time driving. Additionally, Deni implemented a hydraulic braking system, which was a significant advancement from the traditional mechanical brakes used in earlier models, offering better stopping power and driver control.

The interior of the Deni 1940 was designed for comfort, with spacious seating covered in high-quality upholstery. Attention to detail in craftsmanship was paramount, as the manufacturer aimed to create an inviting environment for both the driver and passengers. The dashboard displayed a straightforward layout, equipped with essential gauges for speed and fuel level, reflecting a blend of simplicity and functionality.

Safety was also a consideration in the design of the Deni 1940, with features like a reinforced body structure and strategically placed crumple zones, which contributed to passenger safety in the event of a collision.

Overall, the Deni 1940 remains an emblematic representation of its time, showcasing the combination of aesthetic beauty, technological advancement, and functional design in the automotive industry. This model has since become a sought-after collector's item, celebrated for its craftsmanship and historical significance in the evolution of motor vehicles.