Basic Operations, Setting the Beat EQ | Clarion XDZ616w specification

		Basic Operations
	∗ When you have entered a title in a CD, it ap-	range: –6 to +8)
	pears in the sub display. If you have not en-	3. When the adjustment is complete, press A-M
	tered a title, “NO-TITLE” appears in the title	button @several times until the function mode
	display instead. For information on how to en-	button @several times until the function mode
	display instead. For information on how to en-	is reached.
	ter a title, refer to the subsection “Entering	is reached.
	ter a title, refer to the subsection “Entering
	titles” in the “Other Handy Functions”.

Setting the Beat EQ

This unit comes with 3 types of sound tone effects stored in memory. Select the one you prefer.

∗The factory default setting is “OFF”.

Each time you press BEQ button 7, the tone effect changes in the following order:

“1 BASS BOOST” ➜“2 IMPACT” ➜“3 EXCITE” ➜ “USER CUSTOM” ➜ “TONE BYPASS” ➜

“1 BASS BOOST” ...

• 1 BASS BOOST : bass emphasized

• 2 IMPACT	: treble emphasized
• 3 EXCITE	: bass and treble emphasized

•USER CUSTOM

•TONE BYPASS

Adjusting the tone

Press A-M button @ and select the item to ad- just. Each time you press A-M button @, the item changes in the following order:

●When “1 BASS BOOST” is set

“BASS BOOST” ➜“BALANCE” ➜“FADER”

➜“ST NO TITLE”

●When “2 IMPACT” is set

“HIGHT BOOST” ➜ “BALANCE” ➜ “FADER” ➜ “ST NO TITLE”

●When “3 EXCITE” is set

“IMPACT” ➜ “BALANCE” ➜ “FADER” ➜

“ST NO TITLE”

●When “USER CUSTOM” is set

“BASS<GAIN>” ➜ “MID<GAIN>” ➜ “TREB <GAIN>” ➜“BALANCE” ➜ “FADER” ➜ “ST

NO TITLE”

●When “TONE BYPASS” is set

“BALANCE” ➜ “FADER” ➜ “ST NO TITLE”

Adjusting the bass

1.Press A-M button @ and select “BASS <GAIN>”.

2.Turning the Rotary knob $clockwise empha- sizes the bass; turning it counterclockwise attenuates the bass.

∗ The factory default setting is “0”. (Adjustment

Adjusting the MID

1.Press A-M button @and select “MID<GAIN>”

2.Turning the Rotary Knob $clockwise empha- sizes the MID; turning it counterclockwise at- tenuates the MID.

∗The factory default setting is “0” (Adjustment range: -6 to +6).

3.When the adjustment is complete, press A-M button @ several times until function mode is reached.

Adjusting the treble

1.Press A-M button @ and select “TREB <GAIN>”.

2.Turning the Rotary knob $clockwise empha- sizes the treble; turning it counterclockwise attenuates the treble.

∗The factory default setting is “0”. (Adjustment range: –6 to +6)

3.When the adjustment is complete, press A-M button @several times until the function mode is reached.

Adjusting the balance

1.Press A-M button @ and select “BAL”.

2.Turning the Rotary knob $clockwise empha- sizes the sound from the right speaker; turn- ing it counterclockwise emphasizes the sound from the left speaker.

∗The factory default setting is “0”. (Adjustment range: L13 to R13)

3.When the adjustment is complete, press A-M button @several times until the function mode is reached.

Adjusting the fader

1.Press A-M button @ and select “FAD”.

2.Turning the Rotary knob $clockwise empha- sizes the sound from the front speakers; turn- ing it counterclockwise emphasizes the sound from the rear speakers.

∗The factory default setting is “0”. (Adjustment range: F12 to R12)

3.When the adjustment is complete, press A-M button @several times until the function mode is reached.

English

XDZ616 11