Kompernass SWKT 3000 A1 operating instructions Starting Up the Device, Boiling Water

Page 5

Do not allow individuals (including children) to use the appliance whose physical, sensorial or mental abilities or lack of experience and know- ledge hinder their safe usage of it if they have not previously been supervised or instructed in its correct usage.

Tell children about the appliance and its potenti- al dangers so that they do not play with it.

Starting Up the Device

Before starting up the device, make certain that...

– the device, plug and power cable are in good working order and...

– all packaging materials have been removed from the device.

Fill the device with water up to the MAX mark and let it come to a full boil once as described in the next section. Pour out this water.

Boiling Water

Lift away the kettle u for filling!

Open the lid q by pressing down on the unlok- king button w.

Hold the kettle u vertically while filling. Only

then will the level indicator i on the side correctly indicate the water volume.

Fill the kettle u...

at least to the MIN mark so that the device does not overheat,

no higher than the MAX mark so that no boiling water spills out.

First close the lid q...

then place the kettle u on the base t until it sits straight on the base t.

Set the desired water temperature using the temperature control y.

To bring the water to a boil, you must set the temperature controller y to the MAX position.

Now insert the power plug into the power socket and press the ON/OFF switch e down until it snaps in.

The operating light r indicates that the device is now heating up.

￿Danger! Never place the electrical base near water – life-threatening danger!

￿Warning: Pull the power plug from the socket before lifting the kettle u from the base t. This prevents any water splashing out from contacting the electrical connections in the base t, which could cause a short circuit.

 

e

e

k

 

MIN

p

 

 

 

 

 

e

 

 

 

 

g

 

 

 

n

 

 

 

a

 

 

 

 

r

 

 

 

 

 

m

 

 

 

 

r

 

 

 

w

a

 

 

 

 

 

 

 

 

 

Transition-

range

b

o

i

l

i

n g

r a n g e

MAX

For safety reasons, the lid q should not be opened while the water is boiling or is very hot. Otherwise there is a risk of injury.

You should only heat as much water as you need directly. That helps you save electricity, water and time:

Temperature regulator in the boiling range

The devices switches off automatically and the operating light r goes out as soon as the water is at a full boil. The ON/OFF switch e springs out.

- 3 -

Image 5
Contents Kettle Swkt 3000 A1 Swkt 3000 A1 Content Kettle Boiling Water Starting Up the DeviceBefore cleaning the device Cleaning and CareStorage Warranty & ServiceDisposal Importer