10.Phase Control Switch - provides either 0 or 180 degree phase shift of the ampli- fied output (speaker) with respect to the input signal to facilitate bridging of amplifiers.
11.Power LED - when illuminated (green) indicates that the amplifier is on.
Protect LED - when illuminated (red) indicates that the amplifier protective cir- cuitry has been activated due to thermal, output short, supply undervoltage or supply overvoltage.
ESP® Indicator LED - when illuminated (yellow) indicates ESP® functionality and is used to diagnose ESP® features. The LED flash characteristics will assists in diag- nosing the type of fault (see Appendix).
NOTE: The LED on top of the amplifier may also illuminate and flash with the ESP® LED indicator, if this option has been enabled by your installer (requires Bitwriter®).
12. ESP® Port - connection port for Bitwriter® or ESP2 security system.
1 | 2 | 3 | 4 | 5 | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SPEAKER | |
|
|
|
|
|
|
|
| ||
FUSE | +BAT | REM | GND | + + - - | |||||
|
|
|
|
|
|
|
|
|
|
HCCA-D2400
1 | 2 | 3 | 4 | 5 | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SPEAKER | |
|
|
|
|
|
|
|
|
|
|
| ||
|
| FUSE |
| +BAT | REM | GND | + + - - | |||||
|
| |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
2 | 3 | 4 | 2 | 3 | 4 | 5 | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SPEAKER | |
|
|
|
|
|
|
|
|
|
|
|
| ||
+BAT | REM | GND | +BAT | REM | GND | + + - - | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1.ATC Fuse - this fuse(s) protects the amplifier against internal electrical damage and is meant to protect the amplifier only. All other power connections should be fused at the source. The
4 | © 2006 Directed Electronics, all rights reserved |