Emerson Process Management 1056 instruction

Instruction Sheet

PN 51A-1056/RevB November 2010

Model 1056

Dual-Input Intelligent Analyzer

For additional information, please refer to Instruction Manual 51-1056, rev H

or visit www.emersonprocess.com/raihome/liquid

ESSENTIAL INSTRUCTIONS

READ THIS PAGE BEFORE PROCEEDING!

Your instrument purchase from Rosemount Analytical, Inc. is one of the finest available for your particular application. These instruments have been designed, and tested to meet many national and international standards. Experience indicates that its performance is directly related to the quality of the installation and knowledge of the user in operating and maintaining the instrument. To ensure their con- tinued operation to the design specifications, per- sonnel should read this manual thoroughly before proceeding with installation, commissioning, opera- tion, and maintenance of this instrument. If this equipment is used in a manner not specified by the manufacturer, the protection provided by it against hazards may be impaired.

•Failure to follow the proper instructions may cause any one of the following situations to occur: Loss of life; personal injury; property damage; damage to this instrument; and warranty invalida- tion.

•Ensure that you have received the correct model and options from your purchase order. Verify that this manual covers your model and options. If not, call 1-800-854-8257 or 949-757-8500 to request correct manual.

•For clarification of instructions, contact your Rosemount representative.

•Follow all warnings, cautions, and instructions marked on and supplied with the product.

•Use only qualified personnel to install, operate, update, program and maintain the product.

•Educate your personnel in the proper installation, operation, and maintenance of the product.

•Install equipment as specified in the Installation section of this manual. Follow appropriate local and national codes. Only connect the product to electrical and pressure sources specified in this manual.

•Use only factory documented components for repair. Tampering or unauthorized substitution of parts and pro- cedures can affect the performance and cause unsafe operation of your process.

•All equipment doors must be closed and protective cov- ers must be in place unless qualified personnel are per- forming maintenance.

•If this equipment is used in a manner not specified by the manufacturer, the protection provided by it against haz- ards may be impaired.

WARNING

RISK OF ELECTRICAL SHOCK

Equipment protected throughout by double insulation.

•Installation and servicing of this product may expose personel to dangerous voltages.

•Main power wired to separate power source must be disconnected before servicing.

•Do not operate or energize instrument with case open!

•Signal wiring connected in this box must be rated at least 240 V.

•Non-metallic cable strain reliefs do not provide grounding between conduit connections! Use grounding type bushings and jumper wires.

•Unused cable conduit entries must be securely sealed by non-flammable closures to provide enclosure integrity in compliance with personal safety and environmental protection requirements. Unused conduit openings must be sealed with NEMA 4X or IP65 conduit plugs to maintain the ingress protection rating (NEMA 4X).

•Electrical installation must be in accordance with the National Electrical Code (ANSI/NFPA-70) and/or any other applicable national or local codes.

•Operate only with front panel fastened and in place.

•Safety and performance require that this instrument be connected and properly grounded through a three-wire power source.

•Proper use and configuration is the responsibility of the user.

Provide a switch or breaker to disconnect the analyzer from the main power supply. Install the switch or breaker near the analyzer and label it as the disconnecting device for the analyzer.

1056 specifications

Emerson Process Management's 1056 is a high-performance flue gas analyzer designed for industrial applications requiring precise measurement of combustion and emissions. This advanced analyzer is instrumental in optimizing combustion processes, ensuring regulatory compliance, and enhancing overall operational efficiency.

One of the key features of the Emerson 1056 is its multi-gas measurement capability. The device can simultaneously monitor multiple gases, such as oxygen, carbon dioxide, carbon monoxide, and nitric oxides. This comprehensive measurement range provides operators with critical insights necessary for managing combustion processes effectively.

The 1056 utilizes advanced infrared and electrochemical sensing technologies. The infrared sensors are particularly effective for measuring gases like CO₂ and CO, while electrochemical cells handle specific gases like O₂ and NOx. These technologies offer high accuracy and reliability across a wide temperature and pressure range, ensuring that the data collected is both timely and precise.

Another significant characteristic of the Emerson 1056 is its robust construction, which is designed to withstand harsh industrial environments. The analyzer features durable materials that resist corrosion and high temperatures, ensuring long-lasting performance. Additionally, the 1056 is equipped with a user-friendly interface that simplifies operation and data interaction. Its intuitive design allows users to access real-time data and easily configure settings, facilitating quick decision-making on the shop floor.

For communication and integration with existing systems, the 1056 supports various industry-standard protocols, such as HART, Modbus, and Ethernet/IP. This compatibility enables seamless integration into broader control and monitoring systems, allowing for enhanced data sharing and management.

Emerson has also placed a strong emphasis on serviceability with the 1056. The analyzer is designed for easy maintenance, with features that simplify calibration and routine checks. This reduces downtime and operational disruptions, ensuring continuous compliance with environmental regulations.

In conclusion, the Emerson Process Management 1056 stands out as a versatile and reliable flue gas analyzer, offering advanced measurement capabilities, robust construction, and seamless integration into industrial systems. Its combination of technology and user-centric design makes it an essential tool for industries striving for efficiency and compliance in their combustion processes.