Directed Electronics d300.1 manual Installation Guidelines

Page 6

INSTALLATION GUIDELINES

1.Please read this owner’s manual carefully before installing this ampli- fier.

2.Disconnect the battery ground terminal prior to making any elec- trical connections.

3.Check for any hazards or obstruc- tions such as gas tanks, fuel or brake lines, and wiring harnesses before mounting the amplifier.

4.Pick a mounting location that will provide adequate access and venti- lation and protect the amplifier from heat, moisture, and dirt.

5.Avoid sharp metal areas when routing cables to the amplifier, and run RCA cables away from the power cables and other potentially noisy car harnesses.

6.The amplifier should be grounded with a short, heavy gauge wire connected directly to the car at a bare metal surface, preferably scraped body sheet metal. Do not use factory ground locations, seat bolts, or brackets that are spotwelded.

7.Always fuse your power connection within eight to ten inches of the

battery terminal. Use a fuse or circuit breaker rated slightly more than the on-board fuse(s) of the amplifier(s). The gauge of power wire used should take into account the total current draw of the system, and the length of wire used. IASCA and other auto sound competition organizations have charts available for this; you can also find a chart in the MECP study guide. Minimum wire gauge recom- mendations for the individual ampli- fiers are listed on the specification page. Always use the same gauge wire for the amplifier ground that you use for the power wire. Be sure to examine the battery ground cable of the vehicle, and if neces- sary, upgrade it by adding an addi- tional ground wire that is the same gauge as the amplifier’s power wire. Remember, the amplifier can only deliver its rated output when it is not current limited by the power and ground supply wires.

8.This amplifier is designed to drive a speaker load that measures from two to four ohms. Keep in mind that heat is the long-term enemy of automotive electronics and the

6

© 2002 Directed Electronics, Inc

 

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model d300.1 Directed Electronics, Inc Table of Contents CongratulationsLimited TWO-YEAR Consumer Warranty Features „ High-speed Mosfet switching power supplyInstallation Guidelines Wire Connector Plugs Front Panel CONNECTIONS/CONTROLS Amplifier Connections d300.1 Front+ 12 Volt Power Connect this Rear Panel ConnectionsTOP Panel Features Top Panel CoverSpeaker Wiring Diagrams Crossover Settings and Gain Adjustment Specifications Page Page Directed Electronics, Inc Vista, California

d300.1 specifications

The Directed Electronics D300.1 is a highly regarded automotive security device known for its comprehensive features and advanced technology. Designed to provide enhanced protection against vehicle theft, this system is popular among vehicle owners seeking peace of mind.

One of the primary features of the D300.1 is its impressive two-way communication capability. This allows the user to receive alerts on their remote key fob, enabling them to monitor their vehicle's security status from a distance. The system utilizes a liquid crystal display (LCD) that presents real-time information, ensuring users are always informed about the state of their vehicle.

Another notable aspect of the D300.1 is its virtually unstoppable technology. The system is equipped with a sophisticated shock sensor that detects any movement or vibrations, signaling unauthorized access attempts. This feature can be adjusted according to the owner's preference, providing flexibility based on the specific vehicle and environment.

The D300.1 also includes a reliable immobilizer function. This state-of-the-art technology makes it impossible to start the vehicle without the correct key fob, effectively deterring potential thieves. Additionally, the device integrates seamlessly with the vehicle’s existing locking mechanisms, providing an extra layer of security without compromising the original system.

Further enhancing the system’s capabilities is its compatibility with Directed's SmartStart technology. This feature allows users to control their car remotely via a smartphone application, enabling them to lock, unlock, and monitor their vehicle from virtually anywhere. Such convenience caters to the modern lifestyle, where connectivity is key.

The installation process of the D300.1 is designed to be user-friendly, with comprehensive instructions for both professional installers and DIY enthusiasts. Once installed, the system offers customizable settings that can be tailored to meet the individual needs of each vehicle owner.

In conclusion, the Directed Electronics D300.1 encapsulates innovative technology and robust features, making it a top choice for vehicle security solutions. Its two-way communication, shock sensors, immobilization capabilities, and remote control integration provide a reliable, user-friendly experience that stands out in the automotive security market.
Top Page Image Contents