Directed Electronics Front Panel CONNECTIONS/CONTROLS, Amplifier Connections d300.1 Front

Page 8

FRONT PANEL CONNECTIONS/CONTROLS

1.RCA Output Jacks - These pass through RCA jacks can be used to send a signal to a second amplifier.

2.RCA Input Jacks - Accepts line level outputs from head units or signal processors at voltages between 150mV and 8 volts.

3.Input Gain Adjustment - Controls amplifier sensitivity and is used to match the input level of the ampli- fier to the output level of the signal source.

4.Phase Switch - Changes the phase of the subwoofer speaker output by 180 degrees

5.Crossover Frequency Adjustment - Adjusts the crossover point for the on-board active crossovers.

6.Bass EQ Switch - Adds an additional eight db of boost to the subwoofer output when on.

7.Status LED - Will light GREEN to indi- cate the amplifier is on and oper- ating normally, and will be off if the amplifier shuts down due to short circuit, or DC offset. The LED will remain on and output will cease if the amplifier overheats.

8.Remote Sub Level Control - Controls the subwoofer amplifier gain controls from a remote location for ease of adjustment during listening.

Warning: DO NOT connect a level control knob from other manufacturers to the Remote Sub Level Control of any Viper amplifier. Even though the connectors fit properly, the control knob and connector pin posi- tions may be different and the amplifier will be damaged.

FIGURE 1—AMPLIFIER CONNECTIONS d300.1 FRONT

1

 

2

3

4

 

5

6

 

7

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

© 2002 Directed Electronics, Inc

 

Image 8
Contents Model d300.1 Directed Electronics, Inc Table of Contents CongratulationsLimited TWO-YEAR Consumer Warranty Features „ High-speed Mosfet switching power supplyInstallation Guidelines Wire Connector Plugs Front Panel CONNECTIONS/CONTROLS Amplifier Connections d300.1 Front+ 12 Volt Power Connect this Rear Panel ConnectionsTOP Panel Features Top Panel CoverSpeaker Wiring Diagrams Crossover Settings and Gain Adjustment Specifications Page Page Directed Electronics, Inc Vista, California

d300.1 specifications

The Directed Electronics D300.1 is a highly regarded automotive security device known for its comprehensive features and advanced technology. Designed to provide enhanced protection against vehicle theft, this system is popular among vehicle owners seeking peace of mind.

One of the primary features of the D300.1 is its impressive two-way communication capability. This allows the user to receive alerts on their remote key fob, enabling them to monitor their vehicle's security status from a distance. The system utilizes a liquid crystal display (LCD) that presents real-time information, ensuring users are always informed about the state of their vehicle.

Another notable aspect of the D300.1 is its virtually unstoppable technology. The system is equipped with a sophisticated shock sensor that detects any movement or vibrations, signaling unauthorized access attempts. This feature can be adjusted according to the owner's preference, providing flexibility based on the specific vehicle and environment.

The D300.1 also includes a reliable immobilizer function. This state-of-the-art technology makes it impossible to start the vehicle without the correct key fob, effectively deterring potential thieves. Additionally, the device integrates seamlessly with the vehicle’s existing locking mechanisms, providing an extra layer of security without compromising the original system.

Further enhancing the system’s capabilities is its compatibility with Directed's SmartStart technology. This feature allows users to control their car remotely via a smartphone application, enabling them to lock, unlock, and monitor their vehicle from virtually anywhere. Such convenience caters to the modern lifestyle, where connectivity is key.

The installation process of the D300.1 is designed to be user-friendly, with comprehensive instructions for both professional installers and DIY enthusiasts. Once installed, the system offers customizable settings that can be tailored to meet the individual needs of each vehicle owner.

In conclusion, the Directed Electronics D300.1 encapsulates innovative technology and robust features, making it a top choice for vehicle security solutions. Its two-way communication, shock sensors, immobilization capabilities, and remote control integration provide a reliable, user-friendly experience that stands out in the automotive security market.