Removing/replacing the pouring sieve
•Open the lid w.
•Press from the inside against the pouring sieve q and at the same time push it upwards.
•Clean the pouring sieve q with a lightly moistened dishcloth and under running water.
•After cleaning, insert the pouring sieve q from above and press it firmly into place. Ensure that the bar on the pourer sieve q is gripped in the guide rail.
•Should the scale deposits in the pourer sieve q be firmly settled, lay it in a
Storage
Allow the appliance to cool off completely before putting it into storage.
•Wind the power cable u around the holder on the bottom of the appliance.
•Store the appliance in a dry place.
Disposal
Do not dispose of the appliance in your normal domestic waste.
Dispose of the appliance through an approved dis- posal centre or at your community waste facility. Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal centre.
Dispose of the packaging materials in an environmentally responsible manner.
- 5 -