Changing the Reversible Door

The refrigerator has been built with the door hinges on the right.

If you wish to change the opening direction, follow these instructions:

NOTE: UNPLUG THE REFRIGERATOR FROM

THE ELECTRICAL OUTLET PRIOR TO

CHANGING THE REVERSIBLE DOOR.

1.Empty everything in the refrigerator, including shelves and food.

2.First remove the upper and lower hinge covers on the left and right side by hand.

3.Remove the six screws (using a Phillips screwdriver) that are on the top and bottom of the cabinet.

4.Remove the upper and lower hinges and lift the door and place it on a padded surface to prevent scratches.

4A. All parts removed must be retained to reinstall the door.

5.Transfer the hinges and screws to the left, place the upper hinge pin into the upper hole of the door, then tighten the three screws on the top, then the other three on the bottom. Put the flat hinge cover over the hinge holes on the left.

6.Open the door carefully and slowly to make sure the door is correctly attached and closing properly.