Directed Electronics D1200, D2400 Parallel Synced Gain CONNECTIONS/SETTINGS, Slave/Master Switch

Page 13

PARALLEL SYNCED GAIN CONNECTIONS/SETTINGS

Refer to figure 5 for wiring details.

1.Input Signal - Connect these RCA jacks as described in the Front Panel Connection section of this guide.

2.Slave/Master Switch

„Set the slave/master switch on the master amplifier to the MASTER position.

„Set the slave/master switch on the slave amplifier to the SLAVE position.

„Setting the slave/master switch on both amplifiers will auto- matically set the I/O RCA jack configuration according to each amplifier’s slave or master designa- tion.

NOTE:

One master amplifier can control up to three slave

 

amplifiers in this combination. Multiple identical

 

master/slave combinations can be added to any

 

given system.

3.Phase Switch - Set the phase switches of all synced amps to the same position (all at 0° or all at 180°).

4.In order to achieve safe, optimal perfor- mance, the LPF, Bass EQ, and Subsonic Filter controls on all synced amps must be set to the same position.

5.Signal Connection - Connect an RCA cable between the OUT RCA jack of the master amplifier and the SLAVE IN RCA jack of the slave amplifier as shown in the Figure 5.

6.Subwoofer Speaker Connection - In this amplifier combination each amplifiers must drive its own sepa- rate subwoofer(s). Connect the speaker terminals of each amplifier to any combination of one or more subwoofers that results in nominal impedance between one (D600)) and four ohms. Make sure that each amplifier sees the same speaker impedance.

WARNING: The amplifier’s gain control is bypassed completely in SLAVE mode. Do NOT move the MASTER/SLAVE switch to SLAVE position when the amplifier is connected and playing. Do NOT connect any signal source to the amplifier in SLAVE mode that exceeds 200mV.

© 2004 Directed Electronics, Inc

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Models Congratulations Table of ContentsLimited TWO-YEAR Consumer Warranty Threshold at which hearing loss may result FeaturesInstallation Guidelines Directed Electronics, Inc Front Panel CONNECTIONS/CONTROLS D1200/D2400 D600 uses 1-40A fuse, the D800 uses 2-25A fuses Rear Panel ConnectionsD600 D800 D1200 D2400 Speaker Wiring Diagrams Parallel Synced Gain Combining AmplifiersSlave/Master Switch Parallel Synced Gain CONNECTIONS/SETTINGSSubwoofer Wiring top view Synced amps must be set to the same position External Synced Bridged CONNECTIONS/SETTINGSExternal Synced Bridge Multiple Amplifier Combinations Crossover Settings and Gain Adjustment Directed Amplifier-VARAD Cross Reference Chart LED Tube Installation OptionalCEA Specifications Specifications Directed Electronics, Inc Vista, California

D1200, D2400 specifications

Directed Electronics has established itself as a leading provider of automotive security and remote start systems, with products like the D1200 and D2400 at the forefront of their innovation. These two models showcase the brand's commitment to enhancing vehicle security while ensuring user convenience and ease of operation.

The Directed D1200 is designed primarily for users seeking effective vehicle security. It features a robust alarm system that provides comprehensive protection against theft and unauthorized access. One of the standout characteristics of the D1200 is its dual-zone impact sensor, which detects tampering or intrusion attempts. This allows the system to differentiate between minor disturbances and significant threats, providing an intelligent response to various scenarios.

Equipped with a powerful siren, the D1200 is capable of generating a loud alert, deterring potential thieves effectively. It also includes keyless entry functionality, enabling users to unlock their vehicle from a distance, enhancing convenience alongside security. The system's compact design allows for discreet installation without compromising the aesthetic of the vehicle's interior.

On the other hand, the Directed D2400 takes security a step further by integrating advanced technologies aimed at convenience and control. This model not only features an enhanced alarm system but also offers remote start capabilities. The D2400 allows users to start their vehicle from up to one mile away, making it particularly useful in extreme weather conditions—ensuring a comfortable driving experience before even entering the vehicle.

Additionally, the D2400 boasts smartphone integration, allowing users to control their vehicle's functions through a dedicated mobile application. This remote access feature gives users the ability to monitor their vehicle's status, receive alerts, and implement security measures directly from their smartphones.

Both the D1200 and D2400 emphasize user-friendly interfaces and comprehensive security features. Their installation process is designed to be straightforward, ensuring that even novice users can enjoy the benefits of advanced vehicle protection.

In conclusion, Directed Electronics' D1200 and D2400 models represent the pinnacle of automotive security technology, combining cutting-edge features with user-centric design. Whether the primary concern is theft deterrence or enhanced vehicle control, these systems deliver peace of mind and convenience for today's drivers.
Top Page Image Contents