Directed Electronics D1200, D2400 owner manual LED Tube Installation Optional

Page 19

LED TUBE INSTALLATION (OPTIONAL)

This Directed Audio amplifier has been designed with a custom heat sink that can accommodate two (optional—not supplied) VARAD LED tubes.

1.Before installing the LED tubes, remove and discard the mounting feet from the VARAD LED tubes.

2.Slide each LED tube assembly into your Directed Audio amplifier heat sink. Ensure that the LEDs are facing out for optimal visibility. The wires from the LED tube assembly should be on the signal input end of the amplifier. The Black wire from the LED tube is ground and the Black/White wire from the LED tube is power.

4.Run the two wires from the tube assembly and connect them to the 4-pin LED/FAN input connector. Refer to the LED/FAN harness diagram given earlier in this manual.

NOTE:

If the optional fan IS NOT being used, it is recommended that the second LED tube be wired to this circuit. If the optional

 

fan is being used, it is recommended that the second LED tube be wired in parallel with the first LED tube.

Use the following cross reference chart to select the proper length VARAD LED tube for use with your Directed Audio amplifier.

Directed Amplifier—VARAD Cross Reference Chart

Directed Part Number

Directed Model

VARAD Model

QTY Required

 

 

 

 

45120

A502

HLX6, HL6, HLW9

2

45125

A802

HLX6, HL6, HLW9

2

 

 

 

 

45150

A404

HLX6, HL6, HLW9

2

 

 

 

 

45155

A1004

HLX12, HL12, HLW15

2

 

 

 

 

45095

D600

HLX6, HL6, HLW9

2

 

 

 

 

45100

D800

HLX6, HL6, HLW9

2

 

 

 

 

45105

D1200

HLX6, HL6

2

 

 

 

 

45110

D2400

HLX12, HL12

2

 

 

 

 

45165

D2205

(2) HLX12, (2) HL12

2 or 4

 

 

 

 

© 2004 Directed Electronics, Inc

19

Image 19
Contents Models Congratulations Table of ContentsLimited TWO-YEAR Consumer Warranty Threshold at which hearing loss may result FeaturesInstallation Guidelines Directed Electronics, Inc Front Panel CONNECTIONS/CONTROLS D1200/D2400 D600 uses 1-40A fuse, the D800 uses 2-25A fuses Rear Panel ConnectionsD600 D800 D1200 D2400 Speaker Wiring Diagrams Parallel Synced Gain Combining AmplifiersSlave/Master Switch Parallel Synced Gain CONNECTIONS/SETTINGSSubwoofer Wiring top view Synced amps must be set to the same position External Synced Bridged CONNECTIONS/SETTINGSExternal Synced Bridge Multiple Amplifier Combinations Crossover Settings and Gain Adjustment Directed Amplifier-VARAD Cross Reference Chart LED Tube Installation OptionalCEA Specifications Specifications Directed Electronics, Inc Vista, California

D1200, D2400 specifications

Directed Electronics has established itself as a leading provider of automotive security and remote start systems, with products like the D1200 and D2400 at the forefront of their innovation. These two models showcase the brand's commitment to enhancing vehicle security while ensuring user convenience and ease of operation.

The Directed D1200 is designed primarily for users seeking effective vehicle security. It features a robust alarm system that provides comprehensive protection against theft and unauthorized access. One of the standout characteristics of the D1200 is its dual-zone impact sensor, which detects tampering or intrusion attempts. This allows the system to differentiate between minor disturbances and significant threats, providing an intelligent response to various scenarios.

Equipped with a powerful siren, the D1200 is capable of generating a loud alert, deterring potential thieves effectively. It also includes keyless entry functionality, enabling users to unlock their vehicle from a distance, enhancing convenience alongside security. The system's compact design allows for discreet installation without compromising the aesthetic of the vehicle's interior.

On the other hand, the Directed D2400 takes security a step further by integrating advanced technologies aimed at convenience and control. This model not only features an enhanced alarm system but also offers remote start capabilities. The D2400 allows users to start their vehicle from up to one mile away, making it particularly useful in extreme weather conditions—ensuring a comfortable driving experience before even entering the vehicle.

Additionally, the D2400 boasts smartphone integration, allowing users to control their vehicle's functions through a dedicated mobile application. This remote access feature gives users the ability to monitor their vehicle's status, receive alerts, and implement security measures directly from their smartphones.

Both the D1200 and D2400 emphasize user-friendly interfaces and comprehensive security features. Their installation process is designed to be straightforward, ensuring that even novice users can enjoy the benefits of advanced vehicle protection.

In conclusion, Directed Electronics' D1200 and D2400 models represent the pinnacle of automotive security technology, combining cutting-edge features with user-centric design. Whether the primary concern is theft deterrence or enhanced vehicle control, these systems deliver peace of mind and convenience for today's drivers.