Clearance Heights
When installing above an Electrolux hob (as specified in the table below) the minimum distance between the surface of the hob elements/pan supports and the lower grille of the cooker hood must be 60cm (23 5/8”).
MODEL | FRONT LEFT | REAR LEFT | REAR RIGHT | FRONT RIGHT | TOTAL |
EPCH | 1.7Kw | 1.2Kw | 1.7Kw | 1.2Kw | 5.8Kw |
EPEH | 1.5Kw | 1.0Kw | 2.0Kw | 1.5Kw | 6.0Kw |
EPGH | 3.0Kw | 2.0Kw | 2.0Kw | 1.0Kw | 8.0Kw |
|
|
|
|
|
|
Clearance Heights above other |
| |
Manufacturers Cooking Appliances |
| |
When installed above any other make of |
| |
cooking appliance the distance must be as |
| |
follows: |
| |
A minimum clearance height of 650mm(25 1/2 ”) is |
| |
required when installed above a |
| |
or 700mm (27 1/2 ”) when installed above a |
| |
gas hob. |
| |
A minimum clearance height of 685mm (27”) is |
| |
required when installed above a |
| |
or 787mm (30 1/2 ”) when installed above a |
| |
oven. |
| |
When installed between adjoining wall | Hob | |
cabinets, the wall cabinets must not overhang | ||
| ||
the hob and the distance between the |
|
underside of the cabinet and the worktop | A: | 650mm minimum clearance |
must be 450mm. If the height of the wall | B: | 700mm minimum clearance |
cabinet is less than 450mm a gap of 50mm | C: | |
must be maintained either side of the hob. | D: | 787mm minimum clearance |
This cooker hood must not be installed above a cooking appliance with a high level grill.
12