Electrolux RH30WC55GSB manual Installing the hood, Installing preparation, Removing the packaging

Page 7

Installing the hood

7

 

Installing the hood

For the most e"cient air #ow exhaust, use a straight run or as few elbows as possible.

Vent unit to outside of building, only.

On avarage 2 to 3 hours are necessary to com- plete installation (without considering cut to be done on wall and or on cabinet, installation of ducts , conduit and electrical connections to the mains).

The hood is $tted with Screws and Drywall Anchors suitable for most surfaces, consult a Quali$ed Installer, check if they perfectly $t with your cabinet/wall.

Do not use #ex ducting.

COLD WEATHER installations should have an additional backdraft damper installed to minimize backward cold air #ow and a nonmetallic thermal break to minimize conduction of outside temperatures as part of the ductwork. The damper should be on the cold air side of the thermal break.

The break should be as close as possible to where the ducting enters the heated portion of the house.

Make up air: Local building codes may require the use of Make-Up Air Systems when using Ducted Ventilation Systems greater than speci$ed CFM of air movement.

The speci$ed CFM varies from locale to locale. Consult your HVAC professional for speci$c requirements in your area.

Typical installation

Min installation height from the range top to the bottom of the hood is 30" if a gas range is used or 24" to 30" if an electric range is used.

These hoods ar e not recommended to be used over indoor grills.

The hood may be installed onto a wall and vented to the outdoors, or it can be installed for recirculating operation (recirculating accessories not supplied with the hood).

This hood can be installed over any electric and gas cooktop/range.

It can not be installed over any pr ofessional cooktop / range.

Installing preparation

Advance planning

Determine the exact location of the vent hood. Plan the route for venting exhaust to the outdoors.

Use the shortest and straightest duct route possible.

Refer to “ Ductwork installation guidelines” paragraph for further informations.

Install a wall cap with damper or roof cap at the exterior opening. Order the wall or roof cap and anytransition needed in advance.

Use 8" round metal ductwork only.

Wall framing for adequate support

This vent hood is heavy.

‘Adequate structure and support must be provided in all types of installations. Thehood must be secure to vertical studs in the wall, or to a horizontal support.

The vent hood should be on site before $nal framing and wall $nishing. This will help to accurately locatethe duct work and electrical service.

Installation will be easier if the vent hood is installed before the cook-top and countertop are installed.

Removing the packaging

Remove carton carefully, Wear gloves to protect against sharp edges.

Remove the protective $lm covering the product before putting into operation.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Installation, Use & Care Guide Please read and save this guide Table of contentsQuestions? Important Safety Instructions Read and Save These Instructions Electrical requirements Electrical & Installation requirementsParts Included with your Hood Optional AccessoriesTools/Materials required Removing the packaging Installing the hoodInstalling preparation Wall framing for adequate supportDuctwork and wiring locations Wall ducting House wiring locationMounting the duct cover bracket Ceiling ductingMounting the hood Install framing for hood supportFraming must be capable of supporting 100 lbs Connecting the ductwork Air deector installation Recirculating accessoriesElectrical Shock Hazard Making the electrical connectionsMounting the duct cover Features Display Timer ButtonLight Button Button. Speed Increase / onClock programming Grease lter saturation alarmCharcoal lter saturation alarm Recirculating accessories Audible signal activation and deactivationFor Best results Filters Hood Surface Charcoal lter placement Recirculating accessoriesCleaning Optional Charcoal Filters20Warranty Information LI287D

RH30WC55GSB specifications

The Electrolux RH30WC55GSB is a state-of-the-art hood that combines modern design with advanced functionality, making it an ideal addition to any contemporary kitchen. This powerful range hood is designed to effectively eliminate smoke, odors, and airborne grease, ensuring a clean and comfortable cooking environment.

One of the standout features of the RH30WC55GSB is its impressive ventilation performance. With a powerful motor capable of delivering up to 600 CFM (cubic feet per minute) of airflow, this hood can easily handle the demands of high-heat cooking. Whether you are searing steaks or simmering sauces, the hood quickly removes unwanted pollutants, allowing you to focus on your culinary creations.

The design of the Electrolux RH30WC55GSB is characterized by its sleek stainless steel finish and clean lines, which seamlessly integrate into modern kitchen aesthetics. It features a 30-inch width, making it suitable for most standard cooking ranges, and the under-cabinet installation provides a streamlined look without taking up valuable overhead space.

This hood is equipped with innovative technologies to enhance usability. The dishwasher-safe aluminum mesh filters are designed to capture grease and can be easily removed for cleaning, promoting efficient airflow and longevity. Additionally, the integrated LED lighting illuminates the cooking surface, providing excellent visibility while using the stove. The lights are energy-efficient and long-lasting, ensuring that your kitchen stays well-lit without consuming excessive energy.

User-friendly controls allow for easy operation, enabling you to adjust the fan speed with just a touch. The RH30WC55GSB features multiple fan speeds, allowing you to customize the ventilation according to your cooking needs. This flexibility ensures optimal air quality without excess noise, as the hood operates quietly, even on higher settings.

Moreover, the Electrolux RH30WC55GSB is built with a focus on durability and reliability. Crafted from high-quality materials, it is designed to withstand the rigors of daily cooking while maintaining its aesthetic appeal.

In summary, the Electrolux RH30WC55GSB offers a perfect blend of style, efficiency, and advanced technology. Its powerful performance, easy maintenance, and modern design make it an essential tool for any home chef, elevating both the functionality and aesthetic of the kitchen space.
Top Page Image Contents