Electrolux RH30WC55GSB manual Install framing for hood support, Mounting the hood

Page 10

10 Installing the hood

Install framing for hood support

If drywall is present, mark the screw hole locations. Remove the template.

Cut away enough drywall to expose 2 vertical studs at the holes location indicated by the template.

Install two horizontal supports at least 1”x 6” between two wall studs at the bottom and top mounting holes installation location.

room side of the studs.

Use cleats behind both sides of the support to secure to wall studs.

IMPORTANT:

Framing must be capable of supporting 100 lbs.

Mounting the hood

Install the 8” round transition as shows the image below. The installation screws and the 8” round transition are included on the hood package.

8”

2 people are required to lift and position the hood onto the mounting screws.

Place the template on the wall along the horizon-

tal line, make sure the template is leveled and centered with the centerline.

Mark “upper” screw holes locations in the wall.

IMPORTANT. Check to be sure that hole locations are leveled and correctly centered by the vertical centerline.

Drive “upper” wood screws by hand. Leave ¼ “ of distance between the screw head and the wall.

onto the “upper” screws.

Mark “lower” wood screw holes locations in the wall using a pencil.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Installation, Use & Care Guide Please read and save this guide Table of contentsQuestions? Important Safety Instructions Read and Save These Instructions Electrical & Installation requirements Electrical requirementsParts Included with your Hood Optional AccessoriesTools/Materials required Wall framing for adequate support Installing the hoodInstalling preparation Removing the packagingDuctwork and wiring locations Ceiling ducting House wiring locationMounting the duct cover bracket Wall ductingMounting the hood Install framing for hood supportFraming must be capable of supporting 100 lbs Air deector installation Recirculating accessories Connecting the ductworkMaking the electrical connections Electrical Shock HazardMounting the duct cover Features Button. Speed Increase / on Timer ButtonLight Button DisplayAudible signal activation and deactivation Grease lter saturation alarmCharcoal lter saturation alarm Recirculating accessories Clock programmingFor Best results Filters Optional Charcoal Filters Charcoal lter placement Recirculating accessoriesCleaning Hood Surface20Warranty Information LI287D

RH30WC55GSB specifications

The Electrolux RH30WC55GSB is a state-of-the-art hood that combines modern design with advanced functionality, making it an ideal addition to any contemporary kitchen. This powerful range hood is designed to effectively eliminate smoke, odors, and airborne grease, ensuring a clean and comfortable cooking environment.

One of the standout features of the RH30WC55GSB is its impressive ventilation performance. With a powerful motor capable of delivering up to 600 CFM (cubic feet per minute) of airflow, this hood can easily handle the demands of high-heat cooking. Whether you are searing steaks or simmering sauces, the hood quickly removes unwanted pollutants, allowing you to focus on your culinary creations.

The design of the Electrolux RH30WC55GSB is characterized by its sleek stainless steel finish and clean lines, which seamlessly integrate into modern kitchen aesthetics. It features a 30-inch width, making it suitable for most standard cooking ranges, and the under-cabinet installation provides a streamlined look without taking up valuable overhead space.

This hood is equipped with innovative technologies to enhance usability. The dishwasher-safe aluminum mesh filters are designed to capture grease and can be easily removed for cleaning, promoting efficient airflow and longevity. Additionally, the integrated LED lighting illuminates the cooking surface, providing excellent visibility while using the stove. The lights are energy-efficient and long-lasting, ensuring that your kitchen stays well-lit without consuming excessive energy.

User-friendly controls allow for easy operation, enabling you to adjust the fan speed with just a touch. The RH30WC55GSB features multiple fan speeds, allowing you to customize the ventilation according to your cooking needs. This flexibility ensures optimal air quality without excess noise, as the hood operates quietly, even on higher settings.

Moreover, the Electrolux RH30WC55GSB is built with a focus on durability and reliability. Crafted from high-quality materials, it is designed to withstand the rigors of daily cooking while maintaining its aesthetic appeal.

In summary, the Electrolux RH30WC55GSB offers a perfect blend of style, efficiency, and advanced technology. Its powerful performance, easy maintenance, and modern design make it an essential tool for any home chef, elevating both the functionality and aesthetic of the kitchen space.
Top Page Image Contents