•HD 8795 only: Fix the
sides of the cooker | 11 | |
hood by fastening the |
| |
pins (10a) to the sides |
| |
of the fastening screws |
| |
(10b). |
| |
Block the sides sliding |
| |
the two tabs outwards | 10a | |
(11). |
| |
• Make electrical |
| |
connection (12), but |
| |
leave the hood | 10b | |
disconnected from the | ||
Fig. 12 | ||
home general electric |
panel.
•In the case that it is
decided to use the cooker hood in the extraction version, then fix one of the two flanges provided in the exit hole (13 – extraction). Attention! The tall flange should be used when a telescopic chimney is required to be mounted (this item should be ordered – see special accessories), the short flange is to be used in all other cases.
•Remount the grease filter and the front panels noting the numbering on the back of each screen (from 1 to 4, top to bottom).
•Connect the hood to the mains supply and check the functions are working correctly.
13 | Extractor version |
|
12
14
1
2
13
Filter version
3
4Fig. 13
17