Emerson XMT-P-FF/FI instruction sheet Unpacking and Inspection

Page 5

MODEL Xmt-P

UNPACKING AND INSPECTION

Inspect the shipping container. If it is damaged, contact the shipper immediately for instructions. Save the box. If there is no apparent damage, unpack the container. Be sure all items shown on the packing list are present. If items are missing, notify Emerson Process Management immediately.

INSTALLATION

1.Although the transmitter is suitable for outdoor use, do not install it in direct sunlight or in areas of extreme temperatures.

2.Install the transmitter in an area where vibrations and electromagnetic and radio frequency interference are minimized or absent.

3.Keep the transmitter and sensor wiring at least one foot from high voltage conductors. Be sure there is easy access to the transmitter.

4.The transmitter is suitable for panel (Figure 3), pipe (Figure 4), or surface (Figure 5) mounting.

5.The transmitter case has two 1/2-inch (PG13.5) con- duit openings and either one or four 1/2-inch knock- outs. The panel mount Xmt-P-FF/FI has four knock- outs. The pipe/surface mount transmitter has two knockouts*. One conduit opening is for the power/out- put cable; the other opening is for the sensor cable.

Figure 1 shows how to remove a knockout. The knockout grooves are on the outside of the case. Place the screwdriver blade on the inside of the case and align it approximately along the groove. Rap the screwdriver sharply with a hammer until the groove cracks. Move the screwdriver to an uncracked portion of the groove and continue the process until the knockout falls out. Use a small knife to remove the flash from the inside of the hole.

6.Use weathertight cable glands to keep moisture out to the transmitter. If conduit is used, plug and seal the connections at the transmitter housing to prevent moisture from getting inside the instrument.

7.To reduce the likelihood of stress on wiring connec- tions, do not remove the hinged front panel (-11 mod- els) from the base during wiring installation. Allow sufficient wire leads to avoid stress on conductors.

*NEMA plug may be supplied instead of knockout for pipe/surface version.

INSTALLATION

FIGURE 1. Removing the Knockouts

(9 - 32 VDC)

FIGURE 2. Power Supply/Current Loop Wiring

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Foundation Fieldbus Two-Wire pH/ORP Transmitter Weight/Shipping Weight 2 lb/3 lb 1 kg/1.5 kg DimensionsPH Range 0 to Digital CommunicationsPH/ORP Sensor Sensor Compatibility ChartQuick Start Guide Unpacking and Inspection Panel Mounting Panel Mount InstallationPipe Mounting Pipe Mount InstallationSurface Mounting Surface Mount InstallationLoop Power and Sensor Wiring Panel Mount Loop Power and Sensor Wiring Pipe/Surface Mount Main Menu Specifications subject to change without notice

XMT-P-FF/FI specifications

The Emerson XMT-P-FF/FI is an advanced control system designed for process automation and monitoring, particularly in the oil and gas, chemical, and water treatment industries. With its robust set of features and cutting-edge technologies, the XMT-P-FF/FI offers a reliable solution for ensuring the optimal performance of various processes.

One of the main features of the XMT-P-FF/FI is its flexibility. This system can be configured to meet the specific requirements of a wide range of applications. It supports both flow and level measurement, and thanks to its modular design, users can easily expand and adapt the system to include additional functionalities as needed. This versatility allows operators to optimize their control strategies to improve efficiency and reduce costs.

The XMT-P-FF/FI incorporates advanced technologies that enhance its performance and reliability. Its intelligent algorithms facilitate real-time data processing, enabling users to make informed decisions based on accurate, up-to-date information. The system is equipped with multiple communication options, including Ethernet, Modbus, and other industry-standard protocols, ensuring seamless integration with existing systems and devices.

This control system is also designed with a focus on ease of use. Its intuitive interface allows operators to monitor and control processes with minimal training. Users can access system diagnostics, alarm management, and historical data directly from the interface, which aids in troubleshooting and overall system optimization.

Furthermore, the XMT-P-FF/FI is built to withstand harsh environmental conditions, making it suitable for deployment in challenging industrial settings. Its rugged construction ensures durability and longevity, reducing maintenance needs and overall operational costs.

Another notable characteristic is its commitment to safety and compliance. The XMT-P-FF/FI adheres to relevant industry regulations and standards, ensuring that operations remain safe and environmentally responsible. It can also support various safety functions, further enhancing process reliability.

In summary, the Emerson XMT-P-FF/FI is a powerful and flexible solution for process automation. With advanced technologies, user-friendly features, and a strong focus on safety and reliability, it stands out as a capable control system for various industrial applications, enhancing productivity and operational efficiency.
Top Page Image Contents