Foreword, Intendeduseandlimitations | Electrolux 5957 410 01

A.1 GENERAL INFORMATION

A.1.1 FOREWORD

The purpose of this manual is to provide the necessary information for the correct installation, operation, use and maintenance of the appliance.

Consequently, the manual and all the technical documentation enclosed with the appliance must be kept with the appliance at all times so that they can be consulted by the technician or end user. It is important to inform the appliance user about regulations concerning safety during and after installation.

Read the instructions in the manual carefully before carrying out any operation whatsoever on the appliance, as they give important information about the standards and rules governing its installation and safe use. Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Failure to observe the instructions in this manual when carrying out any operations on the appliance will relieve the manufacturer of all liability. Also, the manufacturer declines any responsibility in the event of problems caused by the use of non-original spare parts.

No part of this of this manual may be reproduced.

A.1.2 INTENDEDUSEANDLIMITATIONS

This appliance has been designed for the refrigeration and preservation of foodstuffs. Any other use is to be considered improper.

ATTENTION: these appliances are not suitable for installation outdoors and/or in environments subject to natural elements (rain, direct sunlight, etc.).

The manufacturer declines all liability for any improper use of the product.

A.1.3TESTING

Our appliances have been designed and optimised with laboratory testing to give high performance and efficiency. The product has gone through 100% testing and is ready for use. The certificates guaranteeing that the tests (visual inspection - electrical test - functional test) have been passed are included with the appliance and are included in specific enclosures.

(section D.5).

A.1.4 GENERALSAFETYRULES

The appliance is manufactured in compliance with following

directives:	ANSI / NSF 7
- Hygiene:	ANSI / NSF 7
- Safety:	UL 471

-CAN / CSA C22.2 No.120 - M91

For model PR43RE1FEU.

A.1.5CUSTOMER’SRESPONSIBILITIES

A fused disconnect switch or a main circuit breaker (customer furnished) MUST be installed in the electric supply line for the appliance. It is recommended that this switch/circuit breaker have lockout/tagout capability. Before making any electrical connections to this appliance, check that the power supply is adequate for the voltage, amperage, and phase requirements on the rating plate. The customer also must provide a grounded electrical line cord of suitable capacity for the input specified on the data plate.

A.1.6 DATA PLATE POSITION

The data plate with all the appliance specifications is located on the refrigeration unit compartment at the top right hand side. There is also a plate bearing the appliance’s PNC code and serial number located underneath the logo.

A.1.7PHYSICALSAFETYFEATURES,HAZARDS The appliance has no sharp or projecting parts.

DANGER! DO NOT REMOVE. There are guards on the units to prevent access to components which require air movement.

A1.8IMMEDIATEINSPECTFORSHIPPINGDAMAGE

The container should be examined for damage before and during unloading. The freight carrier has assumed responsibility for its safe transit and delivery. If damaged equipment is received, either apparent or concealed, a claim must be made with the delivering carrier. Apparent damage or loss must be noted on the freight bill at the time of delivery. The freight bill must then be signed by the carrier representative (Driver). If the bill is not signed, the carrier may refuse the claim. The supplier can supply the necessary forms. A request for inspection must be made to the carrier within 15 days if there is concealed damage or loss that is not apparent until after the equipment is uncrated. The carrier should arrange an inspection. Be certain to hold all contents plus all packing material. Under no circumstances should a damaged appliance be returned to the manufacturer without prior notice and written authorization.

A.2 TECHNICAL DATA

A.2.1MATERIALSANDFLUIDSUSED

All areas designed to come into contact with food are in steel or covered in non-toxic plastic material. An HFC refrigerant, in compliance with current legal standards, is used in the refrig- erating units. The type of refrigerant gas used is stated on the data plate.

A.2.2 DIMENSIONS, PERFORMANCE AND CONSUMPTION

Gross capacity		105.67gal.	400 Iiters
External dimensions:
- Width		23.62”	600mm
- Depth with door closed		26.18”	665mm
- Depth with door open		47.24”	1200mm
- Height		83.15”	2112mm
Chamber dimensions:
- Width		21.26”	540mm
- Depth		21.65”	550mm
- Height		58.42”	1484mm
Shelf dimensions	20.87”x15.75”		530x400mm

-VERSIONS WITH POWER SUPPLY VOLTAGE 120V/1ph/60Hz

Internal temp. range	35.6°F/50°F	+2°C/+10°C
Max. ambient temp.	+109.4°F	+43°C
Current input (°)		5 A
Refrigerant charge R134a	0.617lbs	280 gr
Refrigerant capacity (R134a) (¹)		260 W
Refrigerant capacity (R134a) (²)		556 W
No. and type of defrostings (*)		max each 18h x max 30‘

(°) At room temperature 104°F/40°C.

(¹)At room temperature +95°F/+35°C, condensation temperature 131°F/+55°C and evaporation temperature 14°F/-10°C.

(²)ASHRAE PERFORMANCE ambient temperature 89.6°F/ +32°C, condensation temperature 129.92°F/+54.4°C and evaporation temperature 44.96°F/+7.2°C.

(*) Auto (by electronic board)

5957 410 01, PR43RE1FEU, 726673 specifications

The Electrolux 5957 410 01, 726673, PR43RE1FEU is a premium household appliance designed to enhance the efficiency of your kitchen while providing exceptional performance. With its sleek design and advanced features, this model seamlessly blends functionality with modern aesthetics.

One of the key features of the Electrolux 5957 410 01 is its state-of-the-art cooking technology. This appliance comes equipped with innovative induction cooking systems that provide precise temperature control and rapid heating. Induction cooking not only ensures faster cooking times but also enhances energy efficiency, as it directly heats the cookware instead of the cooktop itself. This means less wasted energy and a cooler kitchen environment.

The appliance is designed with user convenience in mind. It features an intuitive touch control panel that makes it easy to select and adjust cooking settings. The controls are not only straightforward but also responsive, allowing users to make changes instantly while cooking. Additionally, the model incorporates a timer function which enables multitasking without the worry of overcooking.

Safety is a priority in the design of the Electrolux 5957 410 01. It comes with advanced safety features such as child locks and automatic shut-off functionality. This ensures peace of mind for families, knowing that the appliance will not pose a risk when not attended. The cooktop's residual heat indicators also serve as a reminder that the surface may still be hot after use, preventing accidental burns.

Another noteworthy characteristic of this appliance is its flexible cooking zones. The cooktop has multiple zones that can be combined to accommodate larger cookware, making it ideal for preparing meals in large quantities. Whether you are simmering a sauce in a small pot or grilling on a large skillet, the Electrolux 5957 adapts to your needs.

Furthermore, the design incorporates cleaning-friendly materials that resist stains and scratches, making maintenance a breeze. The smooth surface allows for easy wiping, ensuring that the appliance remains in pristine condition over time.

In summary, the Electrolux 5957 410 01, 726673, PR43RE1FEU stands out for its advanced induction cooking technology, user-friendly controls, comprehensive safety features, versatile cooking zones, and easy maintenance. This model exemplifies Electrolux's commitment to quality and innovation in the modern kitchen. With this appliance, users can enjoy an enhanced cooking experience that is both efficient and enjoyable.